|
Photos and specs Samsung HM3100 |
Other manuals for this model:
manual abstract
1 Plug the headset into the charging cradle. 2 Open the cover to the charger jack on the back of the charging cradle. 3 Connect the travel adapter to the charging cradle. 4 Plug the travel adapter in to the wall outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 5 When the headset is fully charged, the red indicator light changes to blue. Unplug the travel adapter from the wall outlet and the charging cradle. English 7 • Repeatedly charging and discharging of the headset, over time will cause the battery performance to diminish. This is normal for all rechargeable batteries. • While charging, the headset goes into charging mode and deactivates other functions. Checking the battery level To check the battery level, press and hold the Volume down button and the Talk button at the same time. Depending on the battery level, the indicator light flashes 5 times in one of the following colours: Battery level Indicator light colour Above 80% Blue 80 ~20% Violet Below 20% Red When the headset battery is low The headset indicator light flashes red and you can hear beeps. If the headset powers off during a call, the call will be automatically transferred to the phone. EnglishWearing the headset Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. Left Right EnglishWearing the headset Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. Left Right You can also use the optional ear rubbers instead of the ear hook. Remove the earpiece cover and attach the ear rubber. Then, rotate the ear rubber left or right slightly depending on which ear you are going to wear the headset. 9 Using your headset This section explains how to turn the headset on or off, pair and connect the headset to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those that are not tested or approved by the Bluetooth Special Interest Group (SIG), may be incompatible with your headset. To ensure you get the best performance from your headset • Keep the distance between your headset and device as small as possible and avoid placing your body or other objects in the signals path. • If you usually use your mobile phone with your right hand, wear the headset on your right ear. • Covering your headset or device could effect its performance so keep contact to a minimum. EnglishTurning the headset on or off To turn the headset on Press and hold the Talk button for 4 seconds. The blue indicator light flashes 4 times. EnglishTurning the headset on or off To turn the headset on Press and hold the Talk button for 4 seconds. The blue indicator light flashes 4 times. Turning the Headset on for the first time, it will automatically enter pairing mode for approx 3 minutes. To turn the headset off Press and hold the Talk button for 4 seconds. The indicator light flashes blue and red then turns off. Pairing and connecting the headset Pairing means a unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In Pairing mode, two devices should be placed close enough. Pairing and connecting the headset with a phone 1 Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.) • With the headset turned off, press and hold the Talk button for 8 seconds. 11 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM3100) from the list of devices found by your phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on. Your headset supports the Simple Pairing feature which allows the headset to be paired with a phone without requesting a PIN. This feature is available for phones that are compliant with Bluetooth version 2.1 or higher. Pairing via the Active pairing feature With the Active pairing feature, your headset automatically looks for a Bluetooth device within range and tries to make a connection with it. Make sure the phone’s Bluetooth visibility option is set on. • In Pairing mode, press and hold the Talk button on the headset. The indicator light colour changes to violet from blue. The headset will attempt active pairing for up to 20 seconds. • The Bluetooth phone you want to connect with must not be paired with other devices. If the phone is already connected to another device, end the connection and restart the Active pairing feature. • This feature may not be supported on some devices. Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected to 2 Bluetooth phones at the same time. To turn Multi-point feature on In Pairing mode, press and hold the Volume up button. The...
Other models in this manual:Wireless Accessories - BHM3100 (879.92 kb)