Votes - 2, Average rating: 3.5 ( )

Manafacture: Craftsman File size: 1.36 mb File name: L0205057.pdf Language of manual:

Your Compound Miter Saw has been shipped completely assembled except for the blade, miter lock handle, and dust guide. WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. • Remove all loose parts from the carton. Separate and check with the list of loose parts. See Figure 2. • Remove the packing materials from around your saw. • Carefully lift saw from the carton and place it on a level work surface. This saw is heavy. To avoid back injury, get help when needed. Cutting Capacity with Miter at 0°/Bevel 0°: 5-7/16 in. wide x 2-9/16 in. thick 3-1/2 in. thick x 4 in. wide Maximum Cutting Capacity with Miter at 45°/Bevel 0°: 3-7/8 in. wide x 2-9/16 in. thick Maximum Cutting Capacity with Miter at 0°/Bevel 45°: 5-7/16 in. wide x 1-9/16 in. thick Maximum Cutting Capacity with Miter at 45°/Bevel 45°: 3-7/8 in. wide x 1-1/2 in. thick Do not discard the packing materials untilyou have carefully inspected the saw, identified all loose parts, and satisfactorily operated your new saw. Your saw has been shipped with the saw arm secured in the down position. To release the saw arm, push down on top of saw arm and cut the tie-wrap. • Lift the saw arm by the handle. Hand pressure should remain on the saw arm to prevent sudden rise upon release of the tie wrap. • Examine all parts to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, do not attempt to plug in the power cord and turn the switch on until the damaged or missing parts are obtained and are installed correctly. 7 The following labels are on the miter saw with locations indicated. andsecurelytightenscrew I Restorelower bladeguard before use CUlt for Blade Change. See DANGER: DO NOT REMOVE ANY GUARD, USE OF SAW WITHOUT THIS GUARD WILL RESULT IN SERIOUS INJURY. A WARNING/ ADVERTENCIA • For your safety, road owner's manual before operating miter saw. • Wear eye protection. • Keep hands out of path of saw blade. • Do not operate saw without guards in place. • Do not perform any operation freehand. • Never roach around the sew blade. • "hJm off tool and wait for sew blade to stop before moving workpiece or changing settings. • Disconnect the saw from the power source before changing blade or servicing. • Do not expose to rain or use in damp places. • Para su seguridad, lea el manual del usuario antes de usar la sierra ingletadora. 10 inch Compound Miter Saw DOUBLEINSULATED5,000 RPM 120VOLTS60HZACONLY15A r AWARNING I WHENSERVICING,USE ONLYIDENTICAL CRAFTSMANREPLACEMENTPARTS. s48467 MODEL 315.212130 SER.,O. C(_UL)us MADE IN TAIWAN SEARS, ROEBUCK A.D CO. L l 43F1 STAnONARYTOOl_ ,.,,,Customer Help Line 1-800-932-3188 Fig. 1 The following items are included with your Compound Miter Saw: Saw Blade -10 in. • 6 mm Hex Key Wrench Miter Lock Handle : 8 mm Hex Key Wrench Dust Guide Hex Key Bolt Blade Wrench • Owner's Manual 5 mm Hex Key Wrench SAWBLADE BLADEWRENCH 8 mmHEXKEY 6 mmHEXKEY (b b DUSTGUIDE 5 mmHEXKEY k MITERLOCKHANDLE Fig. 2 _1= WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious personal injury. The following tools (not included) are needed for checking adjustments of your saw or for installing the blade: 17mmCOMBINATIONWRENCH 10mmCOMBINATIONWRENCH COMBINATION SQUARE FRAMINGSQUARE PHILLIPSSCREWDRIVER 9 KNOW YOUR COMPOUND MITER SAW See Figure 3. Before attempting to use your saw, familiarize yourself with all operating features and safety requirements. _1, WARNING: Do not allow familiarity with your saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. 15 AMP MOTOR Your saw has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings, and has externally accessible brushes for ease of servicing. 10 in. BLADE A 10 in. saw blade is included with your compound miter saw. It will cut materials up to 2-9/16 in. thick or 5-7/16 in. wide, depending upon the angle at which the cut is being made. UPPER BLADEGUARD DUSTGUIDE BEVEL LOCKKNOB BEVEL! MITER FENCE SCREW CUTTING CAPACITIES When the miter angle (miter table) is set at O° and the bevel angle Is set at O°: Your saw will cut materials up to a maximum of 5-7/16 in. wide x 2-9/16 in. thick. It will cut materials up to a maximum thickness of 3-1/2 in. thick x 4 in. wide. When the miter angle (miter table) is set at 45 +and the bevel angle is set at O°: Your saw will cut materials up to a maximum of 3-7/8 in. wide x 2-9/16 in. thick. When the miter angle (miter table) is set at 0° and the bevel angle is set at 450: Your saw will cut materials up to a maximum of 5-7/16 in. wide x 1-9/16 in. thick. When the miter angle (miter table) is set at 4S° and the bevel angle is set at 45+: Your saw will cut materials up to a maximum of 3-7/8 in. wide x 1-1/2 in. thick. SAWARM SWITCHTRIGGER LOWER BLADEGUARD MITERTABLE "NO HAND...

Download now

Please, enter two numbers from picture: