|
manual abstract
4. The operator or user is responsible for acci-4. Never attempt to use an incomplete dents or hazards occurring to other people Hedgetrimmer or one with an unauthorised or their property. modification. Electrical Use 1. The British Standards Institute recommend 1. Use the Hedgetrimmer only in daylight or the use of a Residual Current Device (R.C.D.) good artificial light. with a tripping current of not more than 30mA. 2. Avoid operating your Hedgetrimmer on a Even with a R.C.D. installed 100% safety wet hedge, where feasible. cannot be guaranteed and safe working prac-3. Know how to stop the Hedgetrimmer quickly tice must be followed at all times. Check your in an emergency. R.C.D. every time you use it. 4. Never hold the Hedgetrimmer by the guard. 2. Before use, examine cable for damage, 5. Never operate the Hedgetrimmer with dam- replace it if there are signs of damage or aged guards or without guards in place. ageing. 6. Remove plug from mains before passing 3. Do not use the Hedgetrimmer if the electric Hedgetrimmer to another person. cables are damaged or worn. 7. Avoid operating while people especially chil4. Immediately disconnect from the mains elec-dren are nearby. tricity supply if the cable is cut, or the insula-8. Whilst using the Hedgetrimmer always be tion is damaged. Do not touch the electric sure of a safe and secure operating position. cable until the electrical supply has been dis-9. Keep hands and feet away from the cutting connected. Do not repair a cut or damaged means at all times and especially when cable. Replace it with a new one. switching on the motor. 5. Your electric cable must be uncoiled, coiled 10. Do not use stepladders whilst operating the cables can overheat and reduce the efficien-Hedgetrimmer. cy of your Hedgetrimmer. 11. Remove the plug from the mains :6. Keep cable away from the cutting area. -before leaving the Hedgetrimmer unattended 7. Never carry the product by the cable. for any period; 8. Never pull on the cable to disconnect any of -before clearing a blockage; the plugs -before checking, cleaning or working on the 9. Do not pull cable around sharp objects. appliance; 10. Always switch off at the mains before dis- -if you hit an object. Do not use your connecting any plug, cable connector or Hedgetrimmer until you are sure that the extension cable. entire Hedgetrimmer is in a safe operating 11. Switch off, remove plug from mains and condition; examine electric supply cable for damage or -if the Hedgetrimmer starts to vibrate abnorageing before winding cable for storage. Do mally. Check immediately. Excessive vibranot repair a damaged cable, replace it with a tion can cause injury. new one. Use only Electrolux Outdoor -before passing to another person. Products replacement cable. Maintenance and storage 12. Always wind cable carefully, avoiding kink- 1. Keep all nuts, bolts and screws secure to be ing. sure the Hedgetrimmer is in safe working 13. Use only on AC mains supply voltage shown condition. on ...
Other models in this manual:Chainsaws - HT42 (346.65 kb)
Chainsaws - HT42 (346.65 kb)
Chainsaws - HT42 (346.65 kb)
Chainsaws - HT420 (346.65 kb)