Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
530088541 4/24/01 1 23 9 10 _23 24 21 1. Cylinder Cover 13. Bar Tip Sprocket 2. Front Handle 14. Saw Chain 3. Front Hand Guard 15. Saw Bar 4. Starter Cover 16. Chain Catcher 5. Chain Oil Tank 17. Chain Brake Assembly 6. Starter Handle 18. Rear Hand Guard 7. CarburetorAdjusting Screw 19. Throttle Control/Trigger 8. Choke Control 20. Throttle Lock 9. Rear Handle 21. Bar/Chain Adjustment Tool 10. ON/OFF Stop Switch 22. Chain Tensioning Screw 23. nstruction Manual 11. Fuel Tank 12. Muffler 24. Guide Bar Cover WARNING! This chain saw can be dangerous! Careless or improper use can cause serious or even fatal injury. m Read and understand the instruction manual before using the chain saw. / Measured maximum kickback valuewithout chain brake for the bar and chain combination on the label. There may be more symbols found on your unit other than those listed above. These symbols may represent compliances, standards, or other matters concerning the product. 2 _WARNING: Always disconnect spark plug wire and place wire where it cannot contact spark plug to prevent accidental starting when setting up, transporting, adjusting or making repairs except carburetor adjustments. Because a chain saw is a high-speed woodcutting tool, special safety precautions must be observed to reduce the risk of accidents. Careless or improper use of this tool can cause serious injury. PLAN AHEAD • Read this manual carefully until you completely understand and can follow all safety rules, precautions, and operating instructions before attempting to use the unit. • Restrict the use of your saw to adult users who understand and can follow safety rules, precautions, and operating instructions found in this manual. Hearing Safety Hat Protection _ Eye "_l _ Protection Snug Fitting "'",_,/ Heavy Duty Clothing _ Gloves # Safety Safety Chaps Shoes • Wear protective gear. Always use steel- toed safety footwear with non-slip soles; snug-fitting clothing; heavy-duty, non-slip gloves; eye protection such as non-fogging, vented goggles or face screen; an approved safety hard hat; and sou nd barriers (ear plugs or mufflers) to protect your hearing. Regular users should havehearing checked regularly as chain saw noise can damage hearing. Secure hair above shoulder length. • Keep all parts of your body away from the chain when the engine is running. • Keep children, bystanders, and animals a minimum of 30 feet (10 meters) away from the work area. Do not allow other people or animals to be near the chain saw when starting or operating the chain saw. • Do not handle or operate a chain saw when you are fatigued, ill, or upset, or if you have taken alcohol, drugs, or medication. You must be in good physical condition and mentally alert. Chain saw work is strenuous. If you have any conditionthat might be aggravated by strenuous work, check with your doctor before operating a chain saw. • Carefullyplan your sawing operationin advance. Donor startcuttinguntilyou havea clearwork area, secure footing, and, if you are felling trees, a planned retreat path. OPERATE YOUR SAW SAFELY • Do not operatea chain saw with one hand. Serious injury to the operator, helpers, bystanders or any combination of these persons may result from one-handed operation. A chain saw is intended for two-handed use. • Operatethe chain saw only in a well-ventilated outdoor area. • Do not operate saw from a ladder or in a tree. • Make sure the chain will not make contact with any object while starting the engine. Never try to start the saw when the guide bar is in a cut. • Do not put pressure on the saw at the end of the cut. Applying pressure can cause you to lose control when the cut is completed. • Stop the engine before setting the saw down. • Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged, broken or is otherwise removed. • With the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard. MAINTAIN YOUR SAW IN GOOD WORKING ORDER • Have all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sectionofthis manual. Forexample, if improper tools are used to remove or hold the flywheel when servicing the clutch, structural damage to the flywheel can occur and cause the flywheel to burst. • Make certainthe saw chain stops moving when the throttle trigger is released. For correction, refer to CARBURETOR ADJUSTMENTS. • Never modify your saw in any way. • Keep the handles dry, clean, and free of oil or fuel mixture. • With the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a guide bar cover. • Keep fuel and oil caps, screws, and fasteners securely tightened. • Use only Husqvarna accessories and replacem...
Other models in this manual:Chainsaws - 141 (1.01 mb)