Votes - 4, Average rating: 4.3 ( )

Manafacture: Legacy Car Audio File size: 665.44 kb File name: Language of manual:

Try to drive as high a signal level from the head unit as possible. Protection LED comes on when the amplifier ispowered up. • Check for shorts on speaker leads. • Check that the volume control on the head unit is turned down low. • Remove speaker leads, and reset the amplifier. If the Protection LED still comes on, then the amplifier is faulty. Amplifier(s) gets very hot. • Check that the minimum speaker impedance for that model is correct. • Check for speaker shorts. • Check that there is good airflow around the amplifier. In some applications, an external cooling fan may be required. Distorted sound • Check that the Level control(s) is set to match the signal level of the head unit. • Check that all crossover frequencies are properly set. • Check for shorts on the speaker leads. High squeal noise from speakers. • This is almost always caused by a poorly-grounded RCA patch cord. 15 STOP YES! NO! 2-c hannel Amplifier (Operating in Stereo) 4 ohm 4 ohm Two 4-ohm speakers, wired in stereo, will present a 4-ohm load to each channel of the amplifier. Most two- channel amplifiers will work well in this configuration. Two 4-ohm speakers, wired in parallel to a bridged two-channel amplifier. will present a 2-ohm mono load to the amplifier. MOST TWO-CHANNEL AMPLIFIERS DO NOT SUPPORT 2-OHM MONO OPERATION! AMPLIFIER DAMAGE COULD RESULT!sound around, Inc. 1600 63rd street. brooklyn. ny 11204 4 ohm 4 ohm 2-channel Amplifier (Operating in Bridged Mono) STOP YES! NO! Four 4-ohm speakers, wired in stereo, will present a 4-ohm load to each channel of the amplifier. Most four- channel amplifiers will work well in this configuration. Four 4-ohm speakers, wired in parallel to a bridged four-channel amplifier, will present a 4-ohm mono load to the amplifier. MOST FOUR-CHANNEL AMPLIFIERS DO NOT SUPPORT 2-OHM MONO OPERATION! AMPLIFIER DAMAGE COULD RESULT! 4-c hannel Amplifier (Operating in Bridged Mono) 4 ohm 4 ohm 4 ohm 4 ohm 4-c hannel Amplifier (Operating in Stereo) 4 ohm 4 ohm 4 ohm 4 ohm troubleshooting Troubleshooting ...

Download now

Please, enter two numbers from picture: