Votes - 2, Average rating: 3 ( )

Manafacture: Visonik File size: 293.36 kb File name: ed295ceb-437d-4ea6-9750-67ebff5b0861.pdf Language of manual:

For a home or office installation, attach the antenna to the optional window bracket, affix the bracket to a window with the suction cups and run the cable to the amplifier. (See pages 4 and 6 for details and warnings.) STEP 2 Install the Amplifier Position the amplifier in a well-ventilated location away from direct sunlight. Run the cable from the antenna and attach it to the FME-Male connector labeled “outside antenna” on the amplifier. (See pages 5 and 6 for details.) STEP 3 Attach the Universal Connector Attach the universal connector cable to the FME-Male connector labeled “Universal Connector” on the amplifier. Attach the other end of the cable to your cell phone or cellular data card with the supplied VELCRO®. (See page 7 for details.) STEP 4 Power up the Amplifier IMPORTANT! Before connecting the power supply, ensure that both the antenna cable and the universal connector cable are connected. (See page 8 for details.) 3Mobile Installation Diagram Antenna (sold separately) Cigarette Power Supply SIGNALBOOST™ Amplifier Home/Office Installation Diagram SIGNALBOOST™ Amplifier Cell Phone Connection AC Power Supply and Window Bracket sold separately (Part #859940) SIGNALBOOST™ Amplifier Laptop Connection Vehicle Installation Vehicle Installation Installing the Antenna To receive the best cell signal, select a location in the center of the vehicle’s roof at least 12 inches away from any other antennas and free of obstructions. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. The antenna cable may be run through the door to the amplifier. Warning: The antenna used with this amplifier must have a separation distance of at least 11 inches from all persons. ! Carefully Pull Down Door Seal Run Cable Under Seal For a more professional-looking installation, the antenna cable may be run under the door seal. Carefully pull down the door seal. Run the cable through the seal and push the seal back into place. This prevents constant wear and tear on the cable as the door opens and closes. Tuck Cable Under Seal The antenna cable is small enough to easily tuck under the door seal or plastic molding. 4 Vehicle Installation Vehicle Installation Installing the Wilson SIGNALBOOST™ Amplifier Warning: Do not plug in the DC power supply until the antenna and universal connector cables are attached to the amplifi er. ! Select a location to install the amplifi er that is away from excessive heat, direct sunlight or moisture and that has proper ventilation. Recommended installation locations are: • Under the seat • Under the dash Run the cable from the antenna and attach it to the FME-Male connector labeled “outside antenna” on the amplifier. 5 Attach the universal connector cable to the extension cable and attach the extension cable to the FME-Male connector labeled “Universal Connector” on the amplifi er. Then attach the universal connector to your cell phone or data card. (See page 7) Home/Offi ce Installation Home/Offi ce Installation Installing the Antenna To receive the best cell signal, select a window location at least 12 inches away from any radio or television antennas and free of obstructions. Using the suction cups, position the optional mounting bracket on the window at a height convenient to where the amplifier will be located, then attach the antenna to the bracket. The antenna must be installed vertically. Signal performance will be degraded if the antenna is not vertical. Warning: The antenna used with this amplifier must have a separation distance of at least 11 inches from all persons. ! Installing the Wilson SIGNALBOOST™ Amplifier Warning: Do not plug in the AC power supply until the outside antenna and universal connector cables are attached to the amplifi er. ! Select a location to install the amplifi er that is away from excessive heat, direct sunlight or moisture and that has proper ventilation. Recommended installation locations are: • On a desk or table top • In a bookshelf • On the floor Run the cable from the mini magnet-mount antenna and attach it to the FME-Male connector labeled “outside antenna” on the amplifi er. Attach the universal connector cable to the extension cable and attach the extension cable to the FME-Male connector labeled “Universal Connector” on the amplifi er. Then attach the universal connector to your cell phone or data card. (See page 7) 6 Installing the Wilson Universal Connector Amplifier Universal Connector Cellular data card to the original antenna on your cell phone or cellular data card. For cell phones with an internal antenna, place the universal connector on the back, upper left-hand corner of the phone. (Figure 1) NOTE: Certain phones, such as the Motorola RAZR, have internal antennas at the base, rather than the top, in which case the universal connector should be attached at the bottom rear of the phone. For cell phones with an external antenna, place the universal connector directly below the phone’s orig...

Download now

Please, enter two numbers from picture: