Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 0   File size: 420 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

Instead, say that you cannot come to the phone right now. Follow these steps to record your outgoing message. 8 43-795.fm Page 9 Monday, August 16, 1999 9:07 AM 1. To record the OGM 1 (or OGM 2) message, hold down OGM 1 (or OGM 2) until the TAD beeps and the timer starts counting. Note: As soon as the TAD beeps, release OGM 1 (or OGM 2) quickly. Otherwise, the TAD records a “pop” sound at the beginning of the outgoing message. 2. Speak your message from about 8 inches from the front of the TAD.

downloaded: 0   File size: 222 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

43-764 OWNER’S MANUAL Please read before using this equipment. TAD-764 Digital Answering System Trim Phone with Day/Time Voice Stamp 43-764.fm Page 2 Friday, August 13, 1999 2:43 PM FEATURES Your RadioShack TAD-764 Digital Answering System Trim Phone with Day/ Time Voice Stamp is a combination multi-feature telephone and high-quality fully-digital answering system. Fully digital means the TAD-764 stores all messages on a computer chip — there are no tape mechanisms to wear out and no tapes to bo

downloaded: 0   File size: 673 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

If your telephone wiring does not have a modular jack, you can update it yourself using jacks and adapters available at your local RadioShack store, or have the telephone company update it for you. • The USOC number of the jack to be installed is RJ11C (or RJ11W for a wall plate jack). Caution: The supplied AC adapter was designed specifically for your TAD-759. Use only the supplied adapter. On a Desk Top 1. Plug one end of the supplied long modular cord into the TEL. LINE jack on the back of th

downloaded: 1   File size: 309 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

22 Using the Mailboxes ......................................................................................... 22 Recording an Outgoing Message ..................................................................... 22 Using the Handset ..................................................................................... 23 Deleting an Outgoing Message ................................................................. 23 Using the Announce-Only Feature ............................................

downloaded: 4   File size: 707 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

43-704 OWNER’S MANUAL Please read before using this equipment. TAD-704 16-Minute Digital Telephone Answering System with 68-Memory Caller ID 43-704.fm Page 2 Wednesday, November 17, 1999 4:47 PM FEATURES Your RadioShack TAD-704 16-Minute Digital Telephone Answering System with 68-Memory Caller ID is a combination high-quality fully-digital answering system and Caller ID. The TAD-704 prevents you from missing incoming calls and messages. Fully digital means the TAD-704 stores all messages on a co

downloaded: 0   File size: 192 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

The answering system saves all information, including the outgoing message, on tape so it will be saved during a power failure. When power is restored after a power failure, the answering system plays the tape automatically to restore the outgoing message to the digital chip. Checking the Outgoing Message Press OGM REC/PLAY at any time to hear the outgoing message. The answering system beeps once and plays back the message, then beeps twice. To adjust the volume, see “Setting the System’s Volume

downloaded: 0   File size: 376 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

43-777.fm Page 9 Friday, August 13, 1999 3:44 PM ANSWERING SYSTEM OPERATION SETTING THE TAD-277 TO ANSWER CALLS Rotate VOLUME to the right until it clicks to turn on the TAD-277. When the message indicator stays on and the TAD-277 does not sound any tones, it is ready to answer calls. The TAD-277 hangs up and resets to answer the next call when: • The caller hangs up. • The maximum message length of about 1 minute or 5 minutes is reached (see “Setting the Maximum Message Length” on Page 8). • Th

downloaded: 5   File size: 2 mb   Manafacture: Radio Shack  
Category: Answerphones
@name

If this happens, return the handset to the base for about 5 seconds. This resets the security access-protection code. • About once a month, fully discharge the battery pack by keeping the handset off the base until the BATT LOW indicator lights. Otherwise, the battery pack loses its ability to fully recharge. • If the BATT LOW indicator does not light, but the phone does not work, recharge the battery pack. (The battery pack charge might be too low to light the indicator.) • If the battery pack

downloaded: 0   File size: 166 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

After the new message is played, the PLAY/ SKIP indicator lights. SCREENING CALLS To screen calls, let the TAD-1027 answer them, then listen to the caller’s message through the TAD’s speaker. If you decide to answer the call, pick up any phone on the same phone line as the TAD. The TAD stops recording and resets to answer the next call. Note: If you pick up the phone just as the TAD-1027 answers, the TAD might not stop playing the outgoing message. If this happens, press ANSWER/STOP/DELETE to st

downloaded: 0   File size: 378 kb   Manafacture: Radio Shack  
Category: Answerphones
@name

DC 9V Jack illustration When you first connect power, the TAD beeps once and the message counter counts up from 0 to 10. Then the TAD beeps. A1, A2, Lo, CL and 0 alternately appear to indicate that no outgoing messages are recorded, and the day/time stamp is not set. 43-786.fm Page 9 Monday, August 16, 1999 8:02 AM On a Wall Plate 1. Plug one end of the supplied short modular cord into the TEL. LINE jack on the top of the TAD. 2. Route the cord into the groove on the phone’s base. 3. Position th





Category