Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
Please read the Operating Instructions booklet to learn more about the advanced features of the Q90D. Quick Guide Ameriphone products are manufactured by Clarity®, a Division of Plantronics, Inc. 4289 Bonny Oaks Dr., Ste. 106, Chattanooga,TN 37406 VOICE (800) 426-3738 TTY (800) 772-2889 © 2004 Plantronics, Inc. 79040.000 B2/04. Installing and Using Your Q90D Installing and Using Your Q90D Setting Up Your Q90D Lock Switch 1. Slide the LOCK switch (which is located on the right side of the unit below the ESC key) to the OFF position before using your Q90D. 2. Slide the LOCK switch to the ON position before moving the Q90D to another location. Turning the Q90D ON and OFF 1. To turn ON the Q90D, press the Power key. 2. To turn OFF the Q90D, hold down CTRL and press Power again. Placing TTY Calls Dialing Manually from the Q90D Keyboard 1. Turn ON the Q90D. 2. Press F1 and type in a phone number. 3. Press Return and after the call is answered, start typing. 4. To turn OFF the Q90D, hold down CTRL and press Power. To hang up and make another call, hold down CTRL and press F1 instead. Dialing from the Q90D Phone Directory 1. Turn ON the Q90D. 2. Press F1 to enter DIAL mode. 3. Type the name of the person you are calling or press one of the Arrow keys until the desired name appears. 4. Press Return to DIAL the name that you have selected. 5. After the call is answered, start typing. 6. To turn OFF the Q90D, hold down CTRL and press Power. To hang up, hold down CTRL and press F1 instead. Dialing from a Digital Cellular or Cordless Telephone 1. Connect the cell or cordless phone to the Q90D using the phone cord. 2. Turn ON the Q90D. 3. DIAL the telephone number using the cellular or cordless telephone. 4. When the call is answered, start typing. 5. To turn OFF the Q90D, hold down CTRL and press Power. Receiving Calls Receiving Calls Using a Standard Analog Telephone Line 1. When there is an incoming call, the built-in RING FLASHER flashes. 2. Press the Spacebar to answer. 3. Begin typing. 4. To turn OFF the Q90D, hold down CTRL and press Power. Receiving Calls in Cell Phone Standby Mode When a Phone is Already Connected to the Q90D 1. Plug the cellular telephone or cordless phone into the Q90D. 2. Turn ON the Q90D, hold down CTRL and press F3. 3. When a call comes in and the CELL FLASHER light flashes, turn ON your cellular or cordless telephone. 4. Press the Spacebar and start typing. 5. When finished, turn OFF the cellular or cordless phone. 6. Hold down CTRL and press F3 to return to the cell phone Standby mode or turn OFF the Q90D by holding down CTRL and pressing Power. Receiving Calls Using a Digital Cellular or Cordless Telephone When a Phone is Not Already Connected to the Q90D 1. When you know that a call is coming in, connect your cell phone or cordless phone to the Q90D with a connecting cord. 2. Turn ON your cell phone or cordless phone. 3. Press Power to turn ON your Q90D. 4. Type your response. 5. When you are finished with the conversation, turn OFF the cellular or cordless telephone. 6. To turn OFF the Q90D, hold down CTRL and press Power. 4289 Bonny Oaks Dr.,Ste.106,Chattanooga,TN 37406 (800) 426-3738 VOICE (800) 772-2889 TTY website: © 2004 Plantronics,Inc. All Rights Reserved. Ameriphone,Amplifying Your Life, Clarity, Clarity Power, Clarity Power Control and Walker are trademarks or registered trademarks of Plantronics, Inc. English • Francais • Espanol Q90DTM Appareil numerique TTY / VCO a repondeur textuel Ce guide abrege vous aidera a commencer a utiliser votre nouveau Q90D.Veuillez lire le mode d’emploi fourni avec l’appareil pour mieux connaitre les fonctionnalites avancees du Q90D. Guide abrege Les produits Ameriphone sont fabriques par Clarity®, une filiale de Plantronics, Inc. 4289 Bonny Oaks Dr., Ste. 106, Chattanooga,TN 37406 VOICE (800) 426-3738 TTY (800) 772-2889 © 2004 Plantronics, Inc. 79040.000 B2/04. Installation et utilisation de votre Q90D Installation et utilisation de votre Q90D Configuration de votre Q90D Bouton LOCK 1. Mettez le bouton LOCK (sur la droite de l’appareil, en-dessous de la touche ESC) en position OFF avant de commencer a utiliser votre Q90D. 2. Mettez le bouton LOCK en position ON si vous transportez le Q90D. Pour allumer et eteindre le Q90D 1. Pour allumer le Q90D, appuyez sur la touche Power. 2. Pour eteindre le Q90D, maintenez enfoncee la touche CTRL et appuyez de nouveau sur Power. Pour effectuer des appels TTY Composition manuelle sur le clavier du Q90D 1. Allumez le Q90D. 2. Appuyez sur F1 et composez un numero de telephone. 3. Appuyez sur Return, et quand l’appel a ete recu, commencez a taper. 4. Pour eteindre le Q90D, maintenez enfoncee la touche CTRL et appuyez sur Power. Pour raccrocher et effectuer un autre appel, maintenez enfoncee la touche CTRL et appuyez sur F1. Composition a partir du repertoire telephonique du Q90D 1. Allumez le Q90D. 2. Appuyez sur F1 pour passer au mode DIAL...