Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
1 • Cap Screws M6-1 x 25...............................4 Figure 1. Four cap screws to be removed for changing fences. Installing Fence Support Tube 1. Remove the four cap screws (Figure 1) and remove the fence from your original fence base. 2. Install the fence support tube on the fence base with the spacer plate between the them, as shown in Figure 2. Attaching Resaw Fence 1. Insert the adjustment handle with washer through the hole in the fence and attach the moving plate on the other side (Figure 3). 2. Slide the resaw fence over the moving plate, center it with your original fence, and lock it in position with the adjustment handle. Installing Scale 1. Raise the blade guides, and place the resaw fence against the blade. 2. Note where scale indicator line is over the old scale, and pencil a mark on the rail next to the scale. Figure 2. New fence support tube installed. 3. Remove the old scale and install the new scale so the 0 is even with your pencil mark. Figure 3. Installing resaw fence. H7585 Parts Breakdown and List 1 REF PART # DESCRIPTION QTY 1 PH7585001 RESAW FENCE (AL) 590mm 1 2 PH7528002 MOVING PLATE 1 3 PW01M FLAT WASHER 8MM 1 4 PH7528004 ADJUSTMENT HANDLE M8 X 44 1 5 PH7588007 FENCE SUPPORT TUBE 590MM 1 6 PN01M HEX NUT M6-1 1 7 PH7584007 ADJUST SCREW 1 8 PCAP06M CAP SCREW M6-1 X 25 4 9 PH7588021 SCALE 1 10 PH7528005 END COVER 148 X 22 X 1 2 11 PHTEK3M TAP SCREW M3.5 X 8 4 COPYRIGHT © JUNE, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED SEPTEMBER, 2011. (ST) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #TR7287 PRINTED IN TAIWAN For replacement parts, call 1-800-523-4777. For help, call Technical Support at 1-570-546-9663 or email tech-suppor...