Votes - 2, Average rating: 4
(
)
)
|
manual abstract
The panel must also be connected to the Controller via a mini-AXlink connection. If power is lost during the download process, the unit powers up with the same set of code prior to the download. There is a small window during which a loss of power can be catastrophic. If power is lost between the erase of flash memory and the completion of copying the new boot code from RAM to flash memory, the unit will not operate at all when power returns. If you have not already installed the SoftROM program, do so by following the steps contained on the AMX Control Disc. Configuration To configure the communication setting for the SoftROM program: 1. Press F1 to open the Configuration screen. 2. Using the up/down arrow keys, select the communications port you are using to interface with the controller and press ENTER. 3. Using the right arrow key, move to the BAUD RATE column. Then, use the up/down arrow keys to select the interface communications speed and press ENTER. Be sure the BAUD RATE selections match the setting on the Controller. 4. Press F10 to save the communication settings and exit the Configure screen. Downloading the Firmware To download the firmware: 1. Press F5 to acquire the list of online programmable devices. You can press F2 to select all ONLINE programmable devices and F3 to clear all devices. 2. Using the up/down arrow keys, select your firmware version listed in the Firmware column of the screen, and press ENTER. 3. Using the Tab key, switch to the ONLINE MASTERS list and select the device to be programmed. 4. Press ENTER for each device as it is selected. 5. Press F4 to program the selected device; a loading message appears. 6. Press F5 to refresh the screen. Verify that the selected device has the correct firmware version. If any devices still appear with an old firmware version, repeat steps 3 - 5 until it appears with the correct version. Firmware can be downloaded to multiple device numbers automatically. If multiple devices are selected, the bottom half of the loading bar indicates the percentage complete for the selected devices. VTM-D15/A 15" MultiMedia Touch Panel Systems Upgrading the TPI/3 Firmware 7. Press F10 to exit the SoftROM program. VTM-D15/A 15" MultiMedia Touch Panel Systems On Screen Display (OSD) Features On Screen Display (OSD) Features The following sections describe how to adjust display features on the VTM-D15/A and VTM-D15/AB after the panels are powered up and connected to the TPI/3 or to another source such as DVD or VCR player. On Screen Display (OSD) Icons. On Screen Display (OSD) Icons Save & Exit Exit; Auto (optimizes settings) Next page Language Brightness Contrast Clock (display performance) Phase (display performance) Horizontal position Vertical position Hue; User Color-Display Color OSD timer OSD position Sharpness Auto contrast DOS graphic/text Recall Volume (not available on VTM-D15/A) Color VGA-In (not available on VTM-D15/A) Video-In (not available on VTM-D15/A) Video source (not available on VTM-D15/A) VTM-D15/A 15" MultiMedia Touch Panel Systems On Screen Display (OSD) Features Exiting the OSD When you are ready to quit the On Screen Display (OSD), press the UP or DOWN buttons to select Save and Exit ( ) , then press the or INCREASE or DECREASE button. FIG. 22 Exiting the OSD The OSD will disappear automatically after a specified amount of time. You can also press the Exit, Auto button ( ) to exit the OSD menu. Selecting the Language of the OSD English, French, German, Spanish, and Italian versions of the OSD menus are available. 1. Press any one of the UP, DOWN, INCREASE or DECREASE buttons. The first OSD menu appears. 2. Press the UP or DOWN button to highlight the Next Page icon ( ), then press INCREASE or DECREASE. The second menu appears. 3. Press the UP or DOWN button to highlight the Next Page icon ( ), then press INCREASE or DECREASE. The third menu appears. FIG. 23 Selecting the Language of the OSD 4. The Language icon ( ) is already selected. Press INCREASE or DECREASE to cycle through the language options. 5. Exit the OSD when the language you prefer is displayed. VTM-D15/A 15" MultiMedia Touch Panel Systems On Screen Display (OSD) Features Adjusting Screen Brightness and Contrast 1. Press any one of the UP, DOWN, INCREASE or DECREASE buttons. The first OSD menu appears. 2. The Brightness icon ( ) is already selected. Press INCREASE or DECREASE to adjust the brightness level. 3. Press the UP or DOWN button to highlight the Contrast icon ( ), then press INCREASE or DECREASE to adjust the contrast level. FIG. 24 Adjusting Screen Brightness and Contrast 4. Exit the OSD. Adjusting Display Performance (Phase and Clock) Phase and Clock settings allow you to compensate for drift of computer signals. Press the button to optimize both the settings. If you want to fine-tune the settings for a specific application, follow the steps below. 1. Press any one of the UP, DOWN, INCREASE or DECREASE buttons. The first OSD menu appears. 2. Press the UP or DOWN...