Login:
Votes - 5, Average rating: 4.6 ( )

User manual Panasonic, model CYVMX6800U

Manafacture: Panasonic
File size: 2.54 mb
File name: CYVMX6800U.PDF
Language of manual:enesfr
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


Use them within the range shown in the figure. Plane view: Approximately 2.5 m Vertical view: € ¡OMX68ÛOU 17 8©oP®8i (P®SG3 [STANDBY (R) ON (G)] When the power is off: red When the power is on: green Note: o Be sure to switch the unit to off when closing the display. This sensor automatically adjusts the screen brightness. (When automatic mode is set for the dimmer setting, the screen brightness is automatically adjusted to suit the surrounding brightness.) (=> pages 22, 23) 18 Audio/video inpul terminal 2 (VTR2-IN)- Used to connect a game player or other device, pages 30,31) Video (Yellow) L (White) R(Red) VTR input switch (VTR1 or VTR2) Used to select the VTR input selection. (<=> page 21) Infrared transmitter- Used to transmit audio phones. (=> page 17) Room light switch DOOR: Room light is on when door is opened. OFF: Room light is off. ON: Room light is on. Room light, Room light lens Select buttons (a, v) Used to move the cursor. VTR2 1 r VTR1 oo Ooo to wireless head- OFF DOOR ON £ pages 22-25) Menu button (MENU) Used to determine the various settings. (» pages 22-25) Mode button (MODE) Used to select the dimmer mode. (=> pages 22, 23) Power button (POWER) Used to turn the power ON and OFF. (» page 21) Notes: oWhen RCA cords have been connected to this unit, secure them along the roof panel of the car so that they will not dangle down or become easily disconnected, o Take care to ensure that the RCA cords will not become wrapped around your hands or neck since this may cause an accident. Notes: o Make sure that the infrared transmitter is not covered by hands or hair, o Refrain from adhering stickers, etc. Notes: o If you exchange the bulbs or encounter problems with the room lights, please consult your nearest professional installer. o Purchase 12 V, 5 W bulbs if bulbs other than the ones supplied are to be used. If bulb is in need of replacement: 1. Turn the power off. 2. Open the room light lens with a small flat blade screw driver. 3. Remove old bulbs and replace with bulbs. 4. Reassemble lens covers. 5. Verify function of room lights by turning the power on. © CO 6 ®D S©1 (k 0 r WARNING: 0D0 not insert hands, fingers or foreign objects into the unit while the display is moving. Inserting your hands, fingers or foreign objects into the unit can cause injuries and damage to the unit. oHold the display unit by the upper half of it, and move it carefully without applying undue force. Opsin tine Display IM 1 Push the display release button (OPEN) until the display is unlocked. Press the button with one hand while holding the display with the other. 2 Slide the display unit by both hands until a comfortable viewing angle is reached. Close the Display Unit Move the display unit by both hands until the release button is locked. Notes: oCheck that there are no children in the space around the display unit when opening or closing it. oAlways use both hands to open or close the display unit. oAlways check that the display release button is locked after closing the display unit, o If the display unit cannot be locked, be absolutely sure to consult your dealer and remedy the situation. You can swivel it to the left and right, 30° each way. Hold the display unit by the non-slip part in the upper half of it and adjust its lateral angle. 20 ©ft V.MX6800U Preparations: oTurn the power of the player connected to this unit to ON. oTurn the power of the headphones to ON. Press [POWER]. The STANDBY indicator lights is green. Press [POWER] again to switch off the power. The STANDBY indicator lights is red. o Select “VTR1” when a mobile video deck, video camera or mobile DVD player is connected. o Select “VTR2” when a game player is connected. Notes: oWhen RCA cords have been connected to this unit, secure them along the roof panel of the car so that they will not dangle down or become easily disconnected. oTake care to ensure that the RCA cords will not become wrapped around your hands or neck since this may cause an accident. Y&UMX68Q0U 21 0) <53 SO^fPffîSGD To make the dark parts of the screen brighter for better viewing (e.g. a night scene or hair, etc.). The dimmer level of the LCD screen may vary depending on the location of installation and the position of the viewer’s eye. If this occurs or if the screen whitens, you can use this function to adjust the dimmer level. Automatically adjusts the screen brightness to suit the brightness of the surrounding environment. Press [MODE]. DIMMER MODE i mm 1 MANUAL fy~l f/Tl SELECT ( MENU ) ENTER © Press [a] or [vj to select “AUTO’ (2) Press [MENU]. [DIMMER MODE] I AOT© I MANUAL 00 SELECT ( MENU | ENTER Default: AUTO Press [a] or [v] to adjust brightness to the best visibility. (It is recommended that the setting be between -40 and -60.) Notes: © When “0” is set, the value is fixed to the maximum level and the brightness does not change. © If no operation i...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category