Votes - 3, Average rating: 4 ( )

Manafacture: Wayne-Dalton File size: 4.85 mb File name: 768deced-9632-4ee1-a1cf-9f8ce92f8b5f.pdf Language of manual:

Pay close attention to all warnings and notes. This manual MUST be attached to the wall in close proximity to the garage door. Copyright 2007 Wayne-Dalton Corp. Part No. 325809 Rev.3 7/19/2007 FOR RESIDENTIAL SECTIONAL OVERHEAD GARAGE DOORS ONLY! DO NOT USE ON ONE PIECE DOORS! IMPORTANT! THE DOOR AND OPENER WILL NOT FUNCTION PROPERLY UNTIL INFRARED SAFETY SENSORS ARE INSTALLED AND PROPERLY ADJUSTED! GARAGE DOORS & OPENERS Keychain/Visor Transmitter (1 or 2) Entrapment Label Light Diffuser Opener EMERGENCY RELEASE Emergency Release Tag Bell Wire Red Emergency Release Knob Wall Mounting Brackets Door Arm Lower Door Bracket Rail Assembly W/Upper Door Arm NOTE: Depending on the opener model, some parts listed may not be supplied. Package Contents Multifunction Wall Station W/Hardware To Operate DoorPress Here Wired Deluxe Wall Station W/Hardware 5 Button Wireless Keyless Entry W/ Hardware 1/4” x 4” Hex Head Bolt (2) 1/4”-20 x 3/4” Machine Bolts (2) 1/4” Nylock Nuts 3/8”-16 x 1” Machine Bolt 3/8” Plastic Insert Locking Nut (2) 1/4” - 20 x 2” Carriage Bolts 1/4” Plastic Insert Locking Nut (2) 1/4” - 20 x 5/8” Self Drilling Screws (2) 1/4” x 1-1/2” Lag Screws 3/8” Flat Washer Infrared Safety Sensors (1 Sender + 1 Receiver) (2) Safety Sensor Brackets Wired Safety Sensors W/ Hardware (2)1/4” Locking Nuts Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at I Owner’s Manual 5/16” x 1-1/4” Multi Grip Nylon Shoulder Bushing Clevis Pin Hairpin Cotter PRE-INSTALLATION INSPECTION OF YOUR GARAGE DOOR PRIOR TO PRODRIVE ® OPENER INSTALLATION To ensure your new Prodrive ® opener works as intended, your garage door must be properly installed and balanced. Before installing your garage door opener, open and close you door manually to ensure it operates smoothly from top to bottom. A properly balanced door should not take a lot of effort to open or close by hand. The door should stay in the open and in the closed position without drifting down or creeping up. If a door opens fast, the door may need spring tension reduced. If the door drops fast, the door may need spring tension increased. If the door operates properly, then proceed to your Prodrive™ installation manual for instructions on how to install the Prodrive ® garage door opener. If the operation of the door does not meet these requirements, adjust the spring balance per your door’s installation manual or call a professional installer to make adjustments before installing Prodrive ®. Instruction manuals are available for download on Use the web site to also find the location of your nearest professional dealer. Once the door is properly balanced and operates smoothly, you may proceed with the installation of your Prodrive ® garage door opener. Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at Pre-Installation IMPORTANT! Before starting the installation read these instructions thoroughly to familiarize yourself with all aspects of installation and adjustment. IMPORTANT: IF YOUR GARAGE HAS NO SERVICE ENTRANCE DOOR, INSTALL AN OPTIONAL OUTSIDE QUICK RELEASE LOCK. THIS ACCESSORY ALLOWS MANUAL OPERATION OF GARAGE DOOR FROM OUTSIDE IN CASE OF POWER FAILURE. IDENTIFY YOUR DOOR Identify your door by referring to illustrations below and verify that your door type is a sectional door with curved track. Do not install if the door is any type of one piece door. NOTE: The opener has been designed for sectional doors. Do not attempt to install this opener on any style one piece door. Using this opener on a one-piece door may result in serious personal injury or property damage. TEST YOUR DOOR Before you begin, complete the following two tests to insure that the door is balanced and working properly. A door that binds, sticks or is out of balance could cause severe injury. Do not attempt to compensate for an improperly adjusted door by the installation of an opener. This will interfere with the proper operation of the opener’s safety features and/or may damage the door or opener. Have a qualified service person make any needed adjustments or repairs before proceeding with installation. Door Test One Raise and lower the door and check closely for any sticking or binding that may occur. Lift the door approximately half way open, as illustrated. When releasing the door, it should stay in position. If spring tension pulls the door further open or door weight pulls it down, your door is not properly adjusted. Door Test Two When properly installed, a door should remain clear of the opening, when allowed to rest at its natural, full open position. If “door drift” pulls do...

Download now

Please, enter two numbers from picture: