Votes - 2, Average rating: 4
(
)
)
|
manual abstract
3 Applications .............................................................. 4 Pre-Installation Checklist ........................................ 5 Parts Identification ................................................... 6 Operator Installation ................................................ 7-9 Pivot Arm Installation Actuator Installation Control Box Installation Connecting the Actuator Gate Bracket Installation Limit Switch Adjustment Control Board Connections Control Board Adjustments - Learn Mode 1550ETL/1650ETL Actuator Option ………………….. 10 Push to Open Installation .......................................... 11 Programming Instructions ……………………………. 12 Control Board Description ……………………………. 13-17 Siren Connection ……………………………………… 18 Radio Receiver Options ............................................. 19 Troubleshooting guide .............................................. 20-22 Warranty .................................................................... 23 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS WARNING - To reduce the risk of injury or death: • READ AND FOLLOW ALL INSTRUCTIONS. • Installation should be performed by a professional installer. • Required welding should be performed by a qualified welder. • Should electricity be required, use a certified electrician only. • Any device that requires 120 Volts AC should be U.L. approved. • Review with the owner all safety concerns including: . Do not operate the gate unless area around gate is in full view. . Never let children operate or play with gate controls. Keep the remote control away from children. . Always keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE. . Periodically test the obstruction sensitivity to assure safe and proper operation. Do not test sensitivity by standing between the gate and the hinge or stop post. . The “CAUTION AUTOMATIC GATE” signs should be clearly visible from both sides of the gate. . Always insure that the gate has closed securely before leaving area. . Arrange with local fire and law enforcement for emergency access. • Use the emergency release only when the gate is not moving. • Use safety devices such as loop detectors, edge switches, and beam detectors whenever possible. • Install control devices such as keypads far enough away (5 feet or further) from any moving parts of the operator and gate to prevent possible injury. • Do not install control box where the gate can come in contact with person using the push button on side of control box. • Always disconnect the battery or power source when making adjustments or repairs to any part of the gate or operator. • All rollers should be covered to prevent injury. • KEEP GATES PROPERLY MAINTAINED. Read the owner’s manual. Have a qualified service person make repairs to gate hardware. • The entrance is for vehicles only. Pedestrians must use separate entrance. Test the gate operator monthly. The gate MUST reverse on contact with a rigid object or stop when an object activates the non contact sensors. After adjusting the force or limit of travel, retest the gate operator. Failure to adjust and retest the gate operator properly can increase the risk of injury or death. SAVE THESE INSTRUCTIONS. 3 APPLICATIONS The Apollo Model 1550ETL/1650ETL Swing Gate Operator is approved for Vehicular Class I & II usage under UL 325 Guidelines, and is designed to handle swing gates up to 16 feet in length and 600 pounds each. A professional fence or gate dealer is recommended to assure proper installation. Apollo Gate Operators are available only through qualified dealers with an outstanding reputation in the fence and gate industry. These dealers will be able to recommend the proper equipment for particular applications. Apollo Gate Operators are 12 Volt DC (Direct Current) powered. A 12 Volt sealed battery (33 ampere hour minimum) with connecting posts located on the top is recommended. There are several advantages with 12 Volt DC systems: • Low voltage virtually eliminates risk of electrical shock. • Battery powered operators provide up to 200 operations in the event of power outages. • The battery may be recharged with a trickle charger or by solar energy (eliminating the need for costly trenching to remote entrances). If a trickle charger is used and a standard electrical outlet is not readily available, a licensed electrician will be required for proper electrical hook up. The following table should be used as a guide for capacity of operation of operators only, additional options may reduce the the daily usage. Please note that the charge capability of solar panels will vary with different geographical locations. Daily Cycles 1-10 1-20 1-40 1-60 1-80 80+ 5 watt solar panel * 10 watt solar panel * 20 watt solar panel (requires 5310 regulator) * 30 watt solar panel (requires 5310 regulator) * 40 watt solar panel (requires 5310 regulator) * 1.5 amp battery charger * 10 amp battery charger * Note: Double the amount of solar p...
Other models in this manual:Safety Gate - 1650ETL (1.03 mb)