Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 3   File size: 11 mb   Manafacture: Philips  
Category: Car Receivers
@name@name

insert mast through U-bolt.Tighten nuts securely (fig.5) (Mast sold separately). 6. Connect 2 mast sections as shown in figure 6 (included in SDV9201K only) ENAiming the Antenna 7. Connect a good quality RG-6 coaxial cable to the transformer. Slide the weatherproof boot over the connection firmly until it seals (fig.7) (Cable sold separately) fig. 7 fig. 8 8. Attach cable standoff to mast as shown in figure 8 (included in SDV9201K only) Aiming the Antenna Before permanently mounting the antenna

downloaded: 1   File size: 11 mb   Manafacture: Philips  
Category: Car Receivers
@name@name

FOR YOUR SAFETY, KEEP LADDER AND ANTENNA AWAY FROM POWER LINES. CONTACT MAY CAUSE ELECTROCUTION Antenna Grounding and Safety Warning 1. Outdoor antennas and lead-in conductors from antenna to a building, should not cross over open conductors of electric light of power circuits.They should be kept away from all circuits to avoid the possibility of accidental contact. 2. Each conductor of a lead-in from an outdoor antenna should be connected with an antenna discharge unit. Antenna discharge units

downloaded: 48   File size: 54 kb   Manafacture: Philips  
Category: Car Receivers

downloaded: 13   File size: 24 kb   Manafacture: Philips  
Category: Car Receivers

downloaded: 33   File size: 2 mb   Manafacture: Philips  
Category: Car Receivers
@name

You can enrich sound output with these sound effects: • Dynamic bass boost (DBB) • Automatic loudness control Playable media: • USB storage device • Compatibility: USB 2.0, USB 1.1 • Class support: MSC (Mass Storage Class) • File system: FAT16, FAT32 • Maximum capacity: 32 GB • Files: .mp3, .wma V4, V7, V8, V9 (L1, L2) • Sampling frequencies MP3: 32 kHz, 44.1 kHz, 48 kHz WMA: 44.1 kHz, 48 kHz • Bitrates MP3: 8-320 kbps and variable bitrates WMA: 64-192 kbps and variable bitrates • ID3 tag v2.0 o

downloaded: 2   File size: 2 mb   Manafacture: Philips  
Category: Car Receivers
@name

To enjoy full features, download and install the application to your Android-powered phone. Compatible with Android™ Before using the dock, check your Androidpowered phone and make sure that it meets the following requirements: • With Android operating system V2.2 or later, • With a micro USB socket, and • With a width between 52 mm and 73 mm. For other Android-powered devices with a micro USB socket, you can use the dock to • Charge your device through the supplied USB cable. Prepare for dockin

downloaded: 116   File size: 3 mb   Manafacture: Philips  
Category: Car Receivers
@name

••Make sure that all loose leads are insulated with electrical tape. ••Make sure that the leads do not get caught under screws iron parts that will move (e.g. seat rail). ••Make sure that all ground (earth) leads are run to a common ground (earth) point. ••Use only the supplied mounting hardware for a safe and secure installation. ••Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional. ••When you connect other devices to this system, make sure that th

downloaded: 1   File size: 1 mb   Manafacture: Philips  
Category: Car Receivers

downloaded: 0   File size: 2 mb   Manafacture: Philips  
Category: Car Receivers
@name

37 Register your product and get support at 3 English EN Contents 1 Important 4 Safety 4 Notice 4 2 Your in-car entertainment system 6 Introduction 6 What's in the box 6 Overview of the main unit 7 3 Get started 8 Install the car audio 8 Turn on 11 Set date and time 11 4 Play audio/video/picture 12 Load discs 12 Connect USB device 13 Insert SD/MMC card 13 Play/pause 13 Browse 14 Video options 14 Audio options 15 View photo 16 5 Listen to radio 17 Tune to a radio station 17 Store radio stations i

downloaded: 0   File size: 1 mb   Manafacture: Philips  
Category: Car Receivers





Category