Votes - 2, Average rating: 3
(
)
)
|
manual abstract
The default lock code is 0 0 0 0. You can keep this code or change it. To change the lock code: 1. Select the PARENTAL CONTROL menu option. The PARENTAL CONTROL screen will appear (see Figure 110, left, on page 104) 2. Select the EDIT CODE menu option. The ENTER CODE screen will appear (see Figure 111). Figure 111 3. Enter the default lock code (0 0 0 0) or the current lock code if you have changed it from the default code. (If you enter the wrong code, a message will be displayed indicating that the wrong code has been entered.) 4. The NEW CODE prompt will be displayed. Enter your new four digit code using the 0 – 9 number buttons. You will then be prompted to enter the new code again to confirm. 5. When the new lock code is confirmed, the lock code is changed. You can use this same procedure to change the lock code again after you have changed it from the default code. NOTE: IF YOU HAVE FORGOTTEN YOUR PARENTAL CONTROL CODE, CALL SIRIUS CUSTOMER SERVICE FOR HELP. Menu Options 105 Time Based Features The TIME BASED FEATURES screen (Figure 112) lets you adjust the following features: Figure 112 Clock - Sets the clock format, time zone, and daylight savings time function. Alarm - Sets an alarm for a specifi c time. Program Alert - Sets the radio to tune to a specific channel at a specifi ed time. Auto Shutdown - Sets the radio to turn off at a specifi ed time. Sleep Mode - Sets the radio to turn off after a designated period of time. Use the Channel UP/DOWN buttons to highlight the option you wish to adjust, and press the Select button. Clock The CLOCK screen (see Figure 113) allows you to setup the clock that appears on the Default screen, based on the format desired and the time zone in which you reside. The actual time is provided via the SIRIUS satellite signal, and will automatically update your Starmate ST5. Figure 113 106 Menu Options Menu Options 107 FORMAT: Displays the time in either 12-hour (default) or 24-hour format (see Figure 114). TIME ZONE: Since the clock adjusts the time automatically, it is important to specify your time zone. Select your time zone from the list of the available time zones (see Figure 115). DAYLIGHT SAVINGS TIME: Select ON if your area observes Daylight Savings Time; select OFF if your area does not (see Figure 116). Figure 114 Figure 115 Figure 116 Alarm The ALARM screen (see Figure 117) lets you to set your Starmate ST5 to turn ON at a specific time. The last selected channel prior to shutdown will play when the ST5 powers ON. Figure 117 SET ALARM: This turns the alarm ON and OFF. ALARM TIME: This lets you set the alarm time (see Figure 118). Use the Category < and > buttons to set the hours and use the Channel UP/DOWN buttons to set the minutes when you want the ST5 to power on. (The default time is 12:00.) Figure 118 108 Menu Options Program Alert The PROGRAM ALERT screen (see Figure 119) lets you program the radio to automatically tune to a specific channel at a specific time. The radio must be powered on in order for this feature to function. Figure 119 PROGRAM TIME/DAY: Program the day and time you want the ST5 to tune to the specific channel. 1. Highlight and select PROGRAM TIME/DAY. The PROGRAM TIME/DAY screen will appear (see Figure 120). Figure 120 2. Highlight and select TIME. The PROGRAM TIME screen will appear (see Figure 121). To select the time you wish to tune to the specified channel, use the Category < and > buttons to change the hours, and the Channel UP/DOWN buttons to set the minutes. When you have selected the desired time, press the Select button to set the time and exit. Figure 121 Menu Options 109 3. On the PROGRAM TIME/DAY screen, highlight and select DAY. The PROGRAM DAY screen will appear (see Figure 122). Figure 122 4. Using the channel up and down buttons, select the day of the week you wish to tune to the selected channel, i.e., Monday, Tuesday, etc., and press the Select button. To exit the PROGRAM TIME/DAY menu, press the MENU button. Channel Number: Set the channel to which the radio will tune when Program Alert is ON: 1. On the PROGRAM ALERT screen, highlight and select CHANNEL NUMBER. A channel list screen will appear (see Figure 123). Figure 123 2. Use the Channel UP/DOWN buttons to highlight the channel you want the ST5 to play when Program Alert turns it ON, then press the Select button to set the channel. Program Alert On/Off: Turn Program Alert ON or OFF: 1. On the PROGRAM ALERT screen (see Figure 119, on page 109), highlight and select PROGRAM ALERT ON/OFF. The PROGRAM ALERT ON/OFF screen will appear. 2. Highlight and select ON or OFF. To exit the PROGRAM ALERT ON/OFF menu, press the MENU button. 110 Menu Options Auto Shutdown Auto Shutdown lets you program the ST5 to automatically shut OFF after a one-hour period of inactivity (no button presses or other user intervention). After selecting AUTO SHUTDOWN on the TIME BASED FEATURES screen (see Figure 112, on page 106) the AUTO SHUTDOWN screen will appear (see Figure 124). Figure 12...