Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
• Use only the supplied mounting hardware for a safe and secure installation. Mounting angle adjustment Adjust the mounting angle to less than 45°. Removing the protection collar and the bracket (.) Before installing the unit, remove the protection collar . and the bracket . from the unit. 1 Remove the protection collar .. . Engage the release keys . together with the protection collar .. . Pull out the release keys . to remove the protection collar .. 2 Remove the bracket .. . Insert both release keys . together between the unit and the bracket . until they click. . Pull down the bracket ., then pull up the unit to separate. Mounting example (.) Installation in the dashboard Notes • Bend these claws outward for a tight fi t, if necessary (.-2). • Make sure that the 4 catches on the protection collar . are properly engaged in the slots of the unit (.-3). Mounting the unit in a Japanese car (.) You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Note To prevent malfunction, install only with the supplied screws .. How to detach and attach the front panel (.) Before installing the unit, detach the front panel. .-A To detach Before detaching the front panel, be sure to press ...... Press , and pull it off towards you. .-B To attach Engage part . of the front panel with part . of the unit, as illustrated, and push the left side into position until it clicks. Warning if your car’s ignition has no ACC position After turning the ignition off, be sure to press and hold ..... on the unit until the display disappears. Otherwise, the display does not turn off and this causes battery drain. RESET button When the installation and connections are completed, be sure to press the RESET button with a ballpoint pen, etc., after detaching the front panel. . . Orient the release key correctly. Дepжитe ключ для дeмонтaжa нaдлeжaщим обpaзом. A TOYOTA to dashboard/centre console к пpибоpной пaнeли/цeнтpaльной конcоли Bracket Кpонштeйн Bracket Кpонштeйн B NISSAN . . to dashboard/centre console к пpибоpной пaнeли/цeнтpaльной конcоли Bracket Кpонштeйн Bracket Кpонштeйн . . Existing parts supplied with your car Дeтaли, вxодящиe в комплeкт aвтомобиля A B max. size 5 . 8 mm мaкc. paзмep 5 . 8 мм max. size 5 . 8 mm мaкc. paзмep 5 . 8 мм max. size 5 . 8 mm мaкc. paзмep 5 . 8 мм max. size 5 . 8 mm мaкc. paзмep 5 . 8 мм (OFF) Existing parts supplied with your car Дeтaли, вxодящиe в комплeкт aвтомобиля Power connection diagram Auxiliary power connector may vary depending on the car. Check your car’s auxiliary power connector diagram to make sure the connections match correctly. There are three basic types (illustrated below). You may need to switch the positions of the red and yellow leads in the car stereo’s power connecting lead. After matching the connections and switched power supply leads correctl...
Other models in this manual:Car Receivers - CDX-S2250EE (306.1 kb)
Car Receivers - CDX-S2270EE (306.1 kb)