Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature. Caution alarm If you turn the car ignition off without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Notes • Be sure not to drop the panel when detaching it from the unit. • If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. • When carrying the front panel with you, use the supplied front panel case. 6 Setting the clock The clock uses a 24-hour digital indication. Example: To set the clock to 10:08 1 Press (dspl) for two seconds. jFT -¡•hin 2WJLL *-r The hour indication flashes. o Press either side of the volume button to set the hour. fto go forward to go back 5ET ~'trlnn 4UÍILI Press (SEL). ' 1 \ s SET inÜTüi- IILi^UZ The minute indication flashes. e Press either side of the volume button to set the minute. i map ILMLIO The clock starts. After the clock setting is complete, the display returns to normal playback mode. Cassette Player Listening to a tape Insert a cassette. Playback starts automatically. If a cassette is already inserted, to start playback, press (SRC) repeatedly until “TAPE” appears. The side facing up is played. THPE \m D-M3S The side facing down is played. pi' TRPE D-MSS Tip To change the (MODE) (OO tape's playback direction, press To Press Stop playback (OFF) Eject the cassette continue to next page t 7 Fast-winding the tape During playback, press and hold either side of (seek/ams). '/’+\ Fast-forward Rewind To start playback during fast-forwarding or rewinding, press (mode) (O^). Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (seek/ams) momentarily for each track you want to skip. You can skip up to nine tracks at one time. To locate succeeding tracks To locate preceding tracks Note The AMS function may not work when: — the blanks between tracks are shorter than four seconds — there is noise between tracks — there are long sections of low volume or quiet sections. Playing a tape in various functions You can play the tape in various functions: • REP (Repeat Play) repeats the current track. • BL SKIP (Blank skip) skips blanks longer than eight seconds. • ATA (Automatic Tuner Activation) turns on the tuner automatically when fast-winding the tape. • MTL (Metal) lets you play a metal or CrO2 tape. During tape playback, press the desired function button repeatedly until "ON" in the display appears. Function buttons (3): REP (5): BL SKIP (6): ATA (PTY) MTL Example: ATA function FIJI RTR ON SHUF BL SKIP ATA function starts. To return to normal playback function, select “OFF.” DISC REP MTL TA PTY 8 Radio Memorizing stations automatically — Best Tuning Memory (BTM) The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, MW, and LW). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. 1 Press (src) repeatedly to select the tuner. Each time you press (src) , the source changes as follows: -► TUNER - -► CD*1- - TAPE*2 b- MD*1 b- *1 If the corresponding optional equipment is not connected, this item will not appear. *2 If a tape is not inserted, this item will not appear. Press (mode) repeatedly to select the band. Each time you press (MODE), the band changes as follows: B FM1 —► FM2 -► FM3 -► MW -► LW 1 3 Press (sens) (BTM) for two seconds. The unit stores stations in the order of their frequencies on the number buttons. A beep sounds when the setting is stored. Notes • The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. • When a number is indicated in the display, the unit starts storing stations from the one currently displayed. Memorizing only the desired stations You can preset up to 18 FM stations (6 each for FM1, 2, and 3), up to 6 MW stations, and up to 6 LW stations in the order of your choice. 1 Press (src) repeatedly to select the tuner. 2 Press (mode) repeatedly to select the band. 3 Press either side of (seek/ams) to tune in the station that you want to store on the number button. 4 Press the desired number button ((D to CD) until "MEM" appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previously stored station will be erased. Receiving the memorized stations 1 Press (src) repeatedly to select the tuner. 2 Press (mode) repeatedly to select the band. 3 Press the number button ((D to CD) on which the desired station is stored. continue...
Other models in this manual:Car Receivers - XR-CA410 (1.29 mb)