Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Note: the control panel must be attached into the T-Joint. 2. Press the right side of the panel until a "click" sound is heard. Detaching the front panel 1. Press the REL button on the front panel. 2. Push the panel to the right and pull off the panel. Caution: The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. Note: If the control panel is dirty, wipe off the dirt with soft, dry cloth only. isopropyl alcohol to clean the socket on the back of the control panel. And use a cotton swab soaked in 5 Connection scheme Notes: - In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce the distortion during high volume level. - Prohibit to make the conductors of auto antenna and ground touch with each other. 6 Panel controls Front panel 1. EJECT BUTTON Press it to stop CD playback and eject the disk from the slot. 2. VOLUME KNOB Rotate VOLUME knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. 3. MUT BUTTON Press the button to mute down the sound, press it again to release the volume level. 4. DSP BUTTON Press it to put current playing time on the display 5. DISK SLOT 6. LCD (LIQUID CRYSTAL DISPLAY) 7 7. MON BUTTON Press the button to choose MONO or STEREO 8. LOU button Press it to increase bass output 9. REL BUTTON Press it to release the faceplate 10 MOD BUTTON Press it to select the mode: RADIO => CD/MP3. 11 SEL BUTTON Press SEL button repeatedly to select the audio setting: VOL => BAS => TRE => BAL => FAD. Press and hold for 2 seconds to select the setting: EQ => ESP => CLOCK => REG. Rotate the VOLUME knob to adjust each mode. In CD mode use it during Search mode. 12 BND/ID3 BUTTON In Radio Mode press it to select a band 13 PRESET BUTTONS (1-6) 14 PLAY/ PAUSE BUTTON 15 INT BUTTON Press it to play the first ten seconds of each track 16 RPT BUTTON Press it to select the repeat mode. 17 RDM BUTTON Press it to play the tracks in random order. 18 NUMBERED PRESET BUTTON 5 During MP3 playback press it to move 10 songs back 19 NUMBERED PRESET BUTTON 6 During MP3 playback press it to move 10 songs forward 20 AMS BUTTON In RADIO mode press it to start preset stations scanning. Press it and hold for 2 seconds, the automatic stations searching and saving will start. In CD mode press it and hold for 2 seconds to open the TRACK search window. Press twice to select the FILE search, press for three times to select the CHARACTER . 8 21 LOC BUTTON Press it to change between Local and Distant (DX) tuning mode. Local mode improves reception in some areas where the signal is too strong. 22 i«/»l BUTTONS During playback press the !«/►►! buttons to go to previous/ next track. Press and hold for 2 seconds to start fast backward/ forward playback. In RADIO mode press the !«/►►! buttons to search the station manually. Press and hold for 2 seconds to start automatic station searching. 23 PWR BUTTON Press it to turn the power on. Press and hold for 2 seconds to turn the power off. Inner panel Press the REL button on the front panel to flip it down. 1. LED INDICATOR 2. RESET BUTTON 9 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press REL button, then press the RESET button to restore the unit to the original factory settings. Power button Press the PWR button to switch the unit on. Press it and hold for 2 seconds to switch the unit off. Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status you set. Volume control Rotate VOLUME knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Audio settings adjustment Press SEL button shortly and repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD. Rotate the VOL knob to adjust each mode. NOTE: Adjustments to Bass and Treble will override any preset EQ (Preset Equalizer Curves). In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display mode of radio or disc playback mode. Mode selection Press the MOD button to select the mode: RADIO => CD. Mute function Press the MUTE button to cancel the sound. Press again to resume. Clock display Press the DISP button to show the clock on the display. 10 Radio operations BAND selection Press the BND/ID3 button repeatedly to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2. Auto/ Manual tuning - Manual tuning: Press the !«/►►! buttons shortly to select a station downward or upward step...