Votes - 3, Average rating: 5 ( )

Manafacture: Pioneer File size: 1.13 mb File name: Language of manual:

Photos and specs  Pioneer  DEH-1020E

The first 10 seconds of each track is played. 3 When you find the desired track press b to turn scan play off. ■ If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. ■ After scanning of a CD is finished, normal playback of the tracks will begin again. Pausing disc playback Pause lets you temporarily stop playback of the disc. 1 Press FUNCTION to select PAUSE. 2 Press a or b to turn pause on or off. ■ To return to the normal display, press BAND. 0 Audio Adjustments Using balance adjustment Fader/balance setting creates an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. 2 Press a or b to adjust front/rear speaker balance. FAD F15 to FAD R15 is displayed. ■ FAD 0 is the propersetting when only two speakers are used. 3 Press c or ► to adjust left/right speaker balance. BAL L15 to BAL R15 is displayed. ■ To return to the normal display, press BAND. Using the equalizer There are six stored equalizer settings such as DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be recalled at anytime. • CUSTOM is an adjusted equalizer curve that you create. • When FLAT is selected no supplement or correction is made to the sound. • Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: DYNAMIC—VOCAL—NATURAL—CUSTOM —FLAT—POWERFUL Adjusting equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. Adjusting bass/mid/treble You can adjust the bass/mid/treble level. 1 Press AUDIO to select BASS/MID/ TREBLE. 2 Press a or b to adjust the level. +6 to -6 is displayed as the levelis increased or decreased. ■ To return to the normal display, press BAND. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. 2 Press a or b to turn loudness on or off. ■ You can also turn loudness on or off by pressing and holding EQ. 3 Press c or ► to select a desired level. LOW (low)—HI (high) ■ To return to the normal display, press BAND. ® En ( Operating this unit Section )GI 2 Adjusting source levels SLA (source leveladjustment) lets you adjust the volume levelof each source to prevent ra-dicalchanges in volume when switching between sources. • Settings are based on the FM volume level, which remains unchanged. • The MW/LW volume levelcan also be adjusted with source leveladjustments. 1 Compare the FM volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA. 3 Press a or b to adjust the source volume. SLA+4 to SLA -4 is displayed as the source volume is increased or decreased. ■ To return to the normal display, press BAND.0 Other Functions Adjusting initial settings Using the initialsettings, you can customize various system settings to achieve optimalperformance from this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press SOURCE and hold until function name appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: FM (FM tuning step)—A-PI (auto PI Seek)— AUX (auxil iary input)—SAVE (power save) Use the following instructions to operate each particular setting. ■ To cancel initial settings, press BAND. ■ You can also cancel initial settings by holding down SOURCE until the unit turns off. Setting the FM tuning step Normally the FM tuning step employed by seek tuning is 50 kHz. When AF orTA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. • The tuning step remains at 50 kHz during manualtuning. 1 Press FUNCTION to select FM. 2 Press c or ► to select the FM tuning step. Press C to select 50 (50 kHz). Press ► to select 100 (100 kHz). Switching Auto PI Seek The unit can automatically search for a different station with the same programming, even during preset recall. 1 Press FUNCTION to select A-PI. 2 Press a or b to turn the Auto PI seek on or off. Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1 Press FUNCTION to select AUX. 2 Press a or b to turn the auxiliary setting on or off. Saving the battery consumption Switching this function on enables you to save the consumption of battery power. • Operations other than turning on the source are not allowed when this function is on. En dD English Section ( Operating this unit ) Important If the battery in your vehicle is disconnected the PowerSave mode is canceled. Turn on Power Save again once the battery has been reconnected. If the ignition switch in your vehicle doesn't have an ACC (accessory) position, it is possible depending on the connection method that when PowerSa...

Download now

Please, enter two numbers from picture: