Votes - , Average rating:
(
)
)
Manafacture: Sony
File size: 3.95 mb
File name: Sony-CDX-CA850-Pdf-Rus.Pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
manual abstract
¡5 . EQ7 — m ..........................r .................M E07 I _Rock To cancel the equalizing effect, select “off.” After 3 seconds, the display returns to the normal playback mode. Adjusting the equalizer curve 1 Press (menu). 2 Press either side of (disc) repeatedly until “EQ7 Tune” appears, then press (enter). 3 Press either side of (seek) to select the desired equalizer curve, then press (enter). Each time you press (SEEK), the item changes. 4 Select the desired frequency and level. o Press either side of (seek) to select the desired frequency. Each time you press (SEEK), the frequency changes. 62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16 kHz continue to next page t 27 2 Press either side of (disc) to adjust the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. limn I U To restore the factory-set equalizer curve, press (ENTER) for 2 seconds. 5 Press (menu) twice. When the effect setting is complete, the normal playback mode appears. Setting the Dynamic Soundstage Organizer (DSO) If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear. The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers in the dashboard (virtual speakers). You can store the DSO setting for each source. 1 Press (source) to select a source (radio, CD, or MD). 2 Press (dso) repeatedly until “DSO on” appears. 1] I £15 DSO ™ on_ Selecting the spectrum analyzer The sound signal level is displayed on a spectrum analyzer. You can select a display for ten patterns (A-1 to A-5 or B-1 to B-5), or the automatic display mode where all the patterns appear. 1 Press (source) to select a source (radio, CD, or MD). 2 Press (menu). 3 Press either side of (disc) repeatedly until “SA” appears. SA 15 Auto 4 Press either side of (seek) repeatedly to select the desired setting. 5 Press (enter). To cancel the DSO function, select “DSO off’ in step 2. 28 Labelling a Motion Display Additional Information You can label a Motion Display with up to 64 characters to appear when the unit is turned off. Labels will scroll in the display in the M.Dspl 1 mode (the display remains lit even when the power is off). 1 Press (off). CD/MD playback or radio reception stops (the display remains on). 2 Press (menu), then press either side of (disc) repeatedly until “Name Input” appears. 3 Press (enter). 'I' 4 Enter the characters. o Press (dspl/pty) to select the character type. A —— a —— 0 —— A 2 Press the (+)*1 side of (disc) repeatedly to select the desired character. A — B — C — ... x — y — z — 0 — 1 — 2 ... — ! — “ — # ... — ^ *2 — A *1 For reverse order, press the (-) side of *2 (blank space) Press the (+) side of (seek) after locating the desired character. ili-, If you press the (-) side of (SEEK), you can move back to the left. O Repeat steps O to © to enter the entire sentence. 5 Press (enter). Tips • Simply overwrite or enter “ “ " to correct or erase a sentence. • To erase all sentences, press (enter) for 2 seconds after step 3. Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Fuse (10 A) Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 8) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged. Back of the front panel continue to next page — 29 Notes • For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. Replacing the lithium battery Under normal conditions, batteries will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.) When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. x + side up Removing the unit 1 Remove the front cover o Detach the front panel (page 8). 2 Press the clip inside the front cover with a thin screwdriver. © Repeat step 0 for the other side. 2 Remove the unit o Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting. 0 Repeat step O for the right side. © Slide the unit out of its mounting. Notes on lithium battery • Keep the lith...
Other models in this manual:- ()