Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
! Keep the front panel out of direct sunlight and high temperatures. ! Remove any cables and devices attached to this unit before detaching the front panel to avoid damage to the device or vehicle interior. Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Grab the front panel and remove. 3 Always keep the detached front panel in the protection device such as protection case. Re-attaching the front panel 1 Slide the front panel to the left until it clicks. Front panel and the head unit are connected on the left side. Make sure that the front panel has been properly connected to the head unit. 2 Press the right side of the front panel until it is firmly seated. If you can’t attach the front panel to the head unit successfully, tr y again. However, forcing the front panel into place may result in damage. Turning the unit on 1 Press SRC/OFF to turn the unit on. Turning the unit off 1 Press SRC/OFF and hold until the unit turns off. Selecting a source 1 Press SRC/OFF to cycle between: TUNER (tuner)—CD (built-in CD player)—USB (USB)/iPod (iPod)—SD (SD memory card)—AUX (AUX) Adjusting the volume 1 Turn M.C. to adjust volume. Notes ! ! When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. In this manual, iPod and iPhone will be referred to as iPod. Menu operations identical for function settings/audio adjustments/initial settings/lists Returning to the previous display Returning to the previous list/category (the folder/categor y one level higher) 1 Press DISP/ /SCRL. Returning to the main menu Returning to the top tier of list/category 1 Press and hold DISP/ /SCRL. Returning to the ordinary display Canceling the initial setting menu 1 Press BAND/ESC. Returning to the ordinary display from the list/category 1 Press BAND/ESC. Tuner Basic Operations 1234 5 6789a RDS 6 En Section Operating this unit 02 123 5 b Non-RDS or MW/LW 1 Band indicator 2 5 (stereo) indicator 3 LOC indicator Appears when local seek tuning is on. 4 Preset number indicator 5 Signal level indicator 6 TEXT indicator Shows when the radio text is received. 7 PTY label indicator 8 Program service name 9 News ( ) indicator Appears when the set news program is received. a TP ( ) indicator Appears when a TP station is tuned in. b Frequency indicator Operating this unit Selecting a band 1 Press BAND/ESC until the desired band (FM-1, FM-2, FM-3 for FM or MW/LW) is displayed. Manual tuning (step by step) 1 Push M.C. left or right. Seeking 1 Push and hold M.C. left or right. You can cancel seek tuning by pushing M.C. left or right. While pushing and holding M.C. left or right, you can skip stations. Seek tuning starts as soon as you release M.C. Using Auto PI Seek for preset stations When preset stations cannot be recalled, the unit can be set to perform PI Seek during preset recall. ! The default setting for Auto PI Seek is off. Refer to Auto PI (auto PI seek) on page 16. Storing and recalling stations You can easily store up to six stations for each band as presets. 1 Press (list). Preset screen is displayed. 2 Use M.C. to store the selected frequency in memory. Turn to change the preset number. Press and hold to store. 3 Use M.C. to select the desired station. Turn to change the station. Press to select. # All stations stored for FM bands can be recalled from each independent FM band. # You can also change the station by pushing M.C. up or down. # To return to the ordinary display, press BAND/ ESC or (list). Using PI Seek If the tuner cannot find a suitable station, or reception status deteriorates, the unit automatically searches for a different station with the same programming. During the search, PI seek is displayed and sound is muted. 7 En Section 02 Operating this unit Using radio text Displaying radio text You can display the currently received radio text and the three most recent radio texts. 1 Press DISP/SCRL and hold to display radio text. ! You can cancel radio text display by pressing DISP/SCRL, TA/NEWS, SRC/OFF, EQ or BAND. ! When no radio text is received, NO TEXT appears in the display. 2 Push M.C. left or right to recall the three most recent radio texts. 3 Push M.C. up or down to scroll. Storing and recalling radio text You can store data from up to six radio text transmissions for keys RT Memo 1 to RT Memo 6. 1 Display the radio text you want to store in memory. 2 Press (list). Preset screen is displayed. 3 Use M.C. to store the selected radio text. Turn to change the preset number. Press and hold to store. 4 Use M.C. to select the desired radio text. Turn to change the radio text. Press to select. ! To return to the ordinary display, press BAND/ ESC or (list). ! The tuner automatically memorizes the three latest radio text broadcasts received, replacing text from the least recent reception with new text when it is rec...