Votes - 1, Average rating: 1
(
)
)
|
Other manuals for this model:
Car Receivers - DEH-2700R (1.21 mb)
Car Receivers - DEH-2700R (1.22 mb)
manual abstract
switch, the red lead of the unit should be con-(max. 300 mA 12 V DC). 10. Yellow (2*) nected to a terminal coupled with ignition switch To terminal always supplied with power regard • Don’t pass the yellow lead through a hole into 22. Blue/white (6*) less of ignition switch position. ON/OFF operations. If this is not done, the vehi the engine compartment to connect to the battery. 23.The pin position of the ISO connector will differ cle battery may be drained when you are away 11. Red (5*) This will damage the lead insulation and cause a depends on the type of vehicle. Connect 6* and from the vehicle for several hours. Accessory (or back-up) very dangerous short. 7* when Pin 5 is an antenna control type. In 12. Red (4*) • Do not shorten any leads. If you do, the protec-another type of vehicle, never connect 6* and 7*. To electric terminal controlled by ignition switch tion circuit may fail to work when it should. ACC ON START OFF ON START OFF 24. Left (12 V DC) ON/OFF. • Never feed power to other equipment by cutting 25. Right 13. Black (ground) the insulation of the power supply lead of the 26. Rear Speaker To vehicle (metal) body. unit and tapping into the lead. The current capac 27. Perform these connections when using the 14. ISO connector ity of the lead will be exceeded, causing over- optional amplifier. Note: In some vehicles, the ISO connector may be heating. • When replacing the fuse, be sure to only use a divided into two. In this case, be sure to connect fuse of the rating prescribed on this unit. to both connectors. • Since a unique BPTL circuit is employed, never ACC position No ACC position 15. Yellow/black wire so the speaker leads are directly grounded • The black lead is ground. Please ground this lead If you use an equipment with Mute function, or the left and right . speaker leads are com separately from the ground of high-current prod- wire this lead to the Audio Mute lead on that mon. ucts such as power amps. equipment. If not, keep the Audio Mute lead free • Speakers connected to this unit must be high- If you ground the products together and the of any connections. power with minimum rating of 50 W and imped ground becomes detached, there is a risk of dam ance of 4 to 8 ohms. Connecting speakers with age to the products or fire. output and/or impedance values other than those noted here may result in the speakers catching fire, emitting smoke or becoming damaged. • Cords for this product and those for other prod- ucts may be different colors even if they have the same function. When connecting this prod- uct to another product, refer to the supplied manuals of both products and connect cords that have the same function. 14. ISO connector Note: 15. Yellow/black In some vehicles, the ISO connector may be If you use an equipment with Mute function, wire divided into two. In this case, be sure to this lead to the Audio Mute lead on that equipment. connect to both connectors. If not, keep the Audio Mute lead free of any connecti...
Other models in this manual:Car Receivers - DEH-2700RB (200.4 kb)