Login:
Votes - 0, Average rating: 0 ( )

User manual Pioneer, model DEH-1400R

Manafacture: Pioneer
File size: 866.88 kb
File name:
Language of manual:itenesfrdenl
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


(This is only available when using presets on the F1 band.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. • Sound may be temporarily interrupted by another program during a AF frequency search. • When the tuner is tuned to a non-RDS station the AF indicator flashes. • AF can be switched on or off independently for each FM band. Using PI Seek If the unit fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. During the search, PI SEEK is displayed and the output is muted. The muting is discontinued after completion of the PI seek, whether or not a different station is found. Using Auto PI Seek for preset stations When present stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall. • The default setting for Auto PI Seek is off. See Switching Auto PI Seek on page 16. Limiting stations to regional programming When AF is used to automatically retune frequencies, the regional function limits the selection to stations broadcasting regional programs. Press and hold BAND for about two seconds to turn the regional function on/off. Notes • Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area). • The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station. • REG can be turned on or off independently for each FM band. English En 8 RDS Receiving traffic announcements TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations). 1 Tune in a TP or enhanced other network’s TP station. When you are tuned into a TP or enhanced other network’ s TP station the TP indicator will light. 2 Press TA to turn traffic announcement standby on. Press TA and the TA indicator appears in the display. The tuner will standby for traffic announcements. • To turn traffic announcements standby off, press TA again. 3Use VOLUME to adjust the TA volume when a traffic announcement begins. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered. The newly set volume is stored in memory and recalled for subsequent traffic announcements. 4 Press TA while a traffic announcement is being received to cancel the announcement. The tuner returns to the original source but remains in the standby mode until TA is pressed again. Notes • The system switches back to the original source following traffic announcement reception. • Only TP and enhanced other network’s TP stations are tuned in during seek tuning or BSM when TA is on. Responding to the TP alarm When a TP or enhanced other network’s TP station is lost due to a weak signal the TP indicator is extinguished and a series of short beeps, about five seconds long, sound to remind you to select another TP or enhanced other network‘s TP station. When listening to the tuner, tune in another TP or enhanced other network’s TP station. • When listening to sources other than the tuner the unit will automatically seek out a TP station with the strongest signal after about 10or about 30-second delay. The delay is about 10 seconds if TA is on and 30 seconds if TA and AF are on. 9 En RDS PTY list Specific Type of program English NEWS News AFFAIRS Current affairs INFO General information and advice SPORT Sports WEATHER Weather reports/meteorological information FINANCE Stock market reports, commerce, trading, etc. POP MUS Popular music ROCK MUS Contemporary modern music EASY MUS Easy listening music OTH MUS Non categorized music JAZZ Jazz COUNTRY Country music NAT MUS National music OLDIES Oldies music, golden oldies FOLK MUS Folk music L. CLASS Light classical music CLASSIC Serious classical music EDUCATE Educational programs DRAMA All radio plays and serials CULTURE National or regional culture SCIENCE Nature, science and technology VARIED Light entertainment CHILDREN Children’s SOCIAL Social affairs RELIGION Religion affairs or services PHONE IN Phone in TOURING Travel programs, not for announcements about traffic problems LEISURE Hobbies and recreational activities DOCUMENT Documentaries En 10 Built-in CD player Playing a CD 12 1 TRACK NUMBER indicator Shows the track currently playing. 2 PLAY TIME indicator Shows the elapsed playing time of the current track. 1 Insert a CD into the CD loading slot. Playback will automatically start. CD loading slot • You can eject a CD by pressing CD EJECT. 2 After a CD has been inserted, press...

Other models in this manual:
Car Receivers - DEH-1400RB (866.89 kb)
Car Receivers - DEH-1430R (866.88 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category