Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
Enter the Initial Setting Menu. Hold for 2 seconds 3. Select a desired mode. Each press changes the Mode ... 4. Operate a mode. 5. Cancel the Initial Setting Menu. Note: • Holding down the AUDIO button for 2 seconds also cancels the Initial Setting Menu. Initial Setting Menu Functions The Initial Setting Menu features the following functions. Changing the FM Tuning Step (STEP) Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated. It may be preferable to set tuning step to 50 kHz in the AF mode. 1. Press the AUDIO button and select the FM Tuning Step mode (STEP) in the Initial Setting Menu. 2. Select the desired tuning step with the 2/3buttons. Note: • The tuning step remains set at 50 kHz during Manual tuning. • The tuning step returns to 100 kHz if the battery is temporarily disconnected. Switching the Auto PI Seek (A-PI) During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to “PI Seek Function” on page 11.) 1. Press the AUDIO button and select the Auto PI Seek mode (A-PI) in the Initial Setting Menu. 2. Switch the Auto PI Seek ON/OFF with the 5/°buttons. ENGLISH Other Functions Cellular Telephone Muting Sound from this system is muted automatically when a call is made or received using a cellular telephone connected to this product. • The sound is turned off, “MUTE” is displayed and no audio adjustment is possible. Operation returns to normal when the phone connection is ended. CD Player and Care Precaution • Play only CDs bearing the Compact Disc Digital Audio mark. • This product is designed for use with conventional, fully circular CDs only. Use of shaped CDs are not recommended for this product. • Check all CDs before playing and discard cracked, scratched or warped discs. • Normal playback of CD-R discs other than those recorded with a music CD recorder may not be possible. • Playback of music CD-R discs, even those recorded with a music CD recorder, may not be possible with this product due to disc characteristics or scratches or dirt on the disc. Dirt or condensation on the lens inside this product may also prevent playback. • Titles and other text information recorded on a CD-R disc may not be displayed by this product. • Read the precautions with the CD-R discs before using. • Wipe dirty or damp discs outward from the center with a soft cloth. • Avoid touching the recorded (iridescent) surface when handling discs. • Store discs in their cases when not in use. • Keep discs out of direct sunlight and high temperatures. • Do not affix labels or apply chemicals to discs. • Condensation may collect inside the player when using the heater in cold weather, interfering with playback. Turn it off for an hour or so and wipe damp discs with a soft cloth. • Road shocks may interrupt CD playback. ENGLISH CD Player and Care Built-in CD Player’s Error Message When problems occur with CD playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center. Message Possible cause Recommended action ERROR- 11, 12, 17, 30 Dirty disc. Clean the disc. ERROR- 11, 12, 17, 30 Scratched disc. Replace the disc. ERROR- 14 Unrecorded CD. Check the disc. ERROR- 10, 11, 12, 14, 17, 30, A0 Electrical or mechanical problem. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. HEAT CD player overheating. Discontinue play until the machine temperature drops. Specifications General Power source .......... 14.4 V DC (10.8 – 15.1 V allowable) Grounding system ........................................ Negative type Max. current consumption ...................................... 10.0 A Dimensions (mounting size) ...... 178 (W) Z 50 (H) Z 159 (D) mm (front face) .............. 188 (W) Z 58 (H) Z 19 (D) mm Weight ...................................................................... 1.4 kg Amplifier Maximum power output (DEH-2330R, DEH-2300R,DEH-2300RB) ...................................................................... 50 W Z 4 (DEH-1330R, DEH-1300R) ........................ 45 W Z 4 Continuous power output (DEH-2330R, DEH-2300R,DEH-2300RB) ...................................................................... 27 W Z 4 (DEH-1330R, DEH-1300R) ........................ 25 W Z 4 (DIN45324, +B = 14.4 V) Load impedance .......................... 4 N (4 – 8 N allowable) Preout maximum output level/output impedance ............................ 2.2 V/1 kN Equalizer (3-Band Equalizer) (Low) .................................................. Level: ±12 dB (Mid) .................................................... Level: ±12 dB (High) .................................................. Level: ±12 dB Loudness contour (Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz) (Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz) (High) ....
Other models in this manual:Car Receivers - DEH-1330R (525.79 kb)
Car Receivers - DEH-2300R (525.79 kb)
Car Receivers - DEH-2300RB (525.79 kb)
Car Receivers - DEH-2330R (525.79 kb)