. • 1, 2, 3, 4, 5, 6, 7, 8 Text display part 9 Status display 0 Icon display part ! Graphic display part • To change the information by the Display Type, refer to the page on the following table for the methods to alternate by the Display Type. Display Type A B-1 B-2 B-3 C-1 C-2 C-3 D Text 1 15—15— —15— — Text 3 —15— —15— —— Text 4 —— 15 —— 15 —— Text 5 —— 15 —— 15 —— Text 6 ———15— —15— Text 7 ——————— 15 Status 9 15 ——————— Icon 0 ————16 16 16— Graphic ! 15 ——————— • With Display type D, text is displayed between the top and bottom rows when blank is set in the top or bottom row. • Text display part 6 If whole information cannot be displayed within four rows, hold down on [FM] of the Control knob for at least 1 second to display the remaining portion of the information. Display Type A Status Setting Determine whether the On and Off statuses of various functions are to be displayed on the Display Type A. 1 Enter Status Setting mode Using the Control knob, select "DISPLAY" > "STATUS". For the operation method, refer to (page 9). 2 Select the Status display Turn the Control knob. 3 Exit Status Setting mode Press the Control knob. Display Type A Graphic Display Selection Changing the graphic Display. 1 Enter Graphic Display Selection mode Using the Control knob, select "DISPLAY" > "GRAPHIC". For the operation method, refer to (page 9). 2 Select the graphic display Turn the Control knob or push it towards left or right. Select from the following displays: Graphic display Display Movie 1 – 2 Spectrum analyzer 1 – 8 Wallpaper 1 – 12 Downloaded Wallpaper* Wallpaper scan "SCAN" * For Download Wall Paper, refer to (page 36). 3 Exit Graphic Display Selection mode Press the Control knob. . • During standby, Spectrum analyzer cannot be selected. Text Display Selection Changing the text display. 1 Enter Text Display Selection mode Using the Control knob, select "DISPLAY" > "TEXT". For the operation method, refer to (page 9). 2 Select the text Turn the Control knob or push it towards left or right. See (page 16). Select the row (only for display type with multiple rows) Push the Control knob towards up or down. The cursor (‰) moves to the selected text display part. 3 Exit Text Display Selection mode Press the Control knob. . • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (Other than B-3 or C-3 display mode) • When the music number exceeds 1000, only the last 3 digits of its number are displayed. • Music title, Artist name, and Album name cannot be displayed in WAV file. • When playing music from iPod or music edited by "Music Editor", the folder name display may show something different such as playlist or artist name depending on the music selection procedure. • Same information cannot be displayed in text display part. However, the blank display is able to have multiple selections. • If the selected display item does not have any information, alternative information is displayed. May be blank depending on the displayed row. English | 15 General features The text display In Tuner source Information Display Condition Station name preset "SNPS" 134 Frequency "Frequency" 14 Spectrum Analyzer & Clock "Speana/Clock" 345 Clock "Clock" 17 Date "Date" 1345 7 Blank "Blank" 1345 7 In CD & External disc source Information Display Condition Disc title "Disc Title" 134567 Track title "Track Title" 134567 Track number & Play time "P-Time" 14 Disc name preset "DNPS" 1345 7 Spectrum Analyzer & Clock "Speana/Clock" 345 Clock "Clock" 17 Date "Date" 1345 7 Blank "Blank" 1345 7 In Audio file source Information Display Condition Music title & Artist name "Title/Artist" 134567 Album name & Artist name "Album/Artist" 134567 Folder name "Folder Name" 134567 File name "File Name" 134567 Play time & Music number "P-Time" 14 Spectrum Analyzer & Clock "Speana/Clock" 345 Clock "Clock" 17 Date "Date" 1345 7 Blank "Blank" 1345 7 In Standby Information Display Condition Standby "Source Name" 14 Clock "Clock" 1345 7 Date "Date" 1345 7 Blank "Blank" 1345 7 In Auxiliary input source Information Display Condition Auxiliary input name "Source Name" 14 Spectrum Analyzer & Clock "Speana/Clock" 345 Clock "Clock" 17 Date "Date" 1345 7 Blank "Blank" 1345 7 . • See (page 14) for the display position of "Condition". Display Type A/ Display Type B/ Display Type C Font Color Selection Selecting the display font color. 1 Enter Font Color Selection mode Using the Control knob, select "DISPLAY" > "COLOR". For the operation method, refer to (page 9). 2 Select the text display part Select the character color/ outline color (Display Type A only) Push the Control knob towards up or down. Display Setting "FILL-IN" The color of the text fill. "OUTLINE" The color of the text outline. Select the row (only for display type with multiple rows) Push the Control knob towards up or ...
