Refer to (page 9). 2 Enter display control mode Press the [6]/[2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button. 4 Select the display Type Push the Control knob to [4] or [.]. Select the "Display Type C"/"Display Type D" display. 5 Enter Font Color select mode Press the [4] ("COLOR") button. 6 Select the text display part Push the Control knob to [FM] or [AM]. The cursor ( ) moves to the selected text display part. English | 27 Select the Font Color Push the Control knob to [4] or [.]. 7 Exit display control mode Press the [6] ("RTN") button. Function of the KDC-X889/KDC-MP828/KDCMP7028/ KDC-MP728/KDC-X789 Display Type E G-Analyzer display Switching Switches G-Analyzer display when the Display type is set to "Display Type E". (G: gravity) • Before switching G-Analyzer display, (page 44) and (page 44) are required to be setup. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [6] (KDC-X889/MP828)/[2] (KDC-MP7028/MP728/X789) button. Refer to (page 9). 2 Enter display control mode Press the [6]/[2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button. 4 Select the display Type Push the Control knob to [4] or [.]. Select the "Display Type E" display. 5 Enter G-Analyzer display select mode Press the [3] ("GMENU") button. 6 Select the G-Analyzer display Push the Control knob to [4] or [.]. G-Force Sensor display G- Graphic display G-Meter display (Graphic) G-Meter display (Text) Point Time G-Counter display • G-Graphic display Displays the condition of G on horizontal direction (e.g; when turning the curve) by the graphic. • G-Meter display (Graphic) Displays the maximum value of acceleration G, right direction G, and left direction G by the numerical value. • G-Meter display (Text) The maximum value of acceleration G, right direction G, and left direction G is displayed by the numerical value. The value of G is only the reference so it is differed from the actual value. • G-Counter display Adds the point of the acceleration level. The point is determined after a lapse of 1 hr drive or at power off (ex; ACC Off ), and then it will be displayed by the graph. Furthermore, it displays the average of the past data by the line. (The scale of graph is determined along with the largest point among the past 10 data.) • The value of G-Meter display and G-Counter display can be reset by (page 44). 7 Exit display control mode Press the [6] ("RTN") button. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. 28 | English Tuner features Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob to [4] or [.]. • During reception of stereo stations the "ST" indicator is ON. Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed, the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek " Seek Mode Auto 1" Automatic search for a station. Preset station seek " Seek Mode Auto 2" Search in order of the stations in the Preset memory. Manual " Seek Mode Manual" Normal manual tuning control. Function of remote Direct Access Tuning Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote. AUTO NEXT /AME 1 – 6 SRC Control knob AUTO /AME NEXT 1 – 6 SRC Control knob Band display Frequency display Preset station number ST indicator English | 29 Example: Desired frequency Press button 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (AM) [0], [8], [1], [0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [4] or [.]. 3 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" — "[6]" are displayed above the [1] — [6] buttons. Refer to (page 9). 4 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1...
)
