• Under the display type other than "Display Type D", the function item is not displayed. When the display type other than "Display Type D" is selected, press [1] to [6] buttons or [NEXT] button. The function item will be displayed approximately 5 seconds. • The information can be switched by the Display Type. Refer to the page on the following table for the methods to switch by the Display Type. Display Type A B C D E Graphic 1 14 14 — — — Text 2 — 16 — — — Upper 4 — — 17 17 — Middle 5 — — 17 — — Lower 6 — — 17 17 — G-Analyzer 9 — — — — 20 Display Type A/ Display Type B Graphic part/ Spectrum Analyzer Display Switching Switching the graphic Display/ Spectrum analyzer display. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to (page 9). 2 Enter display control mode Press the [2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button. 4 Select the display Type Push the Control knob to [4] or [.]. Select the "Display Type A"/ "Display Type B" display. English | 15 5 Select the graphic/ spectrum analyzer display Press the [3] ("Graph") button. 6 Select the graphic/ spectrum analyzer display part display Push the Control knob to [4] or [.]. Each time the button is pressed, the graphic display/ spectrum analyzer display switches as shown below. Graphic display/ Spectrum Analyzer display Movie 1 Movie 2 Movie 3*1 Downloaded movie*1 Spectrum analyzer 1*2 Spectrum analyzer 2*2 Spectrum analyzer 3*2 Spectrum analyzer 4 *1 Spectrum analyzer 5*1 Wallpaper & Downloaded Wallpaper*1 • *1 Function of the KDC-W8531 • *2 Function of the KDC-W8531/W7531 • Downloaded movie and Downloaded Wall Paper, refer to (page 42). • KDC-W7031 doesn't display the Spectrum analyzer. 7 Exit display control mode Press the [6] ("RTN") button. • The setting of this function is available while "Display Type A"/ "Display Type B" is selected for the Display mode. Display Type A/ Display Type B Wallpaper selecting Select a wallpaper to display when Display Type is set to "Display Type A"/ "Display Type B". 1 Select the wallpaper display Refer to (page 14). 2 Select the wallpaper Display the wallpapers one after another and select one 1 Turn the wallpaper scan ON. Press the Control knob. Each time the knob is pressed, the Wallpaper scan is turned ON and OFF. When it’s ON, "SCAN" is displayed. When it’s ON, each wallpaper is displayed every several seconds. 2 At the wallpaper you want to display. Press the Control knob. Select wallpaper manually 1 Turn the wallpaper scan OFF. Press the Control knob. Each time the knob is pressed, the Wallpaper scan is turned ON and OFF. 2 Select the wallpaper. Push the Control knob to [FM] or [AM]. Each time the knob is pushed, the Wallpaper changes. 3 Exit Display Control mode Press the [6] ("RTN") button. 16 | English General features Display Type B Text Display Switching Switching the text display. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to (page 9). 2 Enter display control mode Press the [2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button. 4 Select the display Type Push the Control knob to [4] or [.]. Select the "Display Type B" display. 5 Enter text select mode Press the [2] ("TEXT") button. 6 Select the text Push the Control knob to [4] or [.]. Refer to the table described later for setting items. 7 Exit Display Control mode Press the [6] ("RTN") button. In Tuner source Information Display Program Service name or Frequency (FM) "BAND+ch+PS" Radio text, Program Service name or Frequency (FM) "Radio Text" Frequency (AM) "BAND+ch+FREQ" Clock "Clock" Date "Date" In CD & External disc source Information Display Disc title "Disc Title"* Track title "Track Title"* Track number & Play time "P-Time" Disc name "DNPS" Clock "Clock" Date "Date" In Audio file source Information Display Song title & Artist name "Title/Artist"* Album name & Artist name "Album/Artist"* Folder name "Folder Name" File name "File Name" Play time & File number "P-Time" Clock "Clock" Date "Date" In Auxiliary input source Information Display Auxiliary input name "AUX Name"/"AUX EXT" Clock "Clock" Date "Date" In Standby Information Display Standby "STANDBY" Clock "Clock" Date "Date" • Auxiliary input name is displayed for the Auxiliary input source. • * If the contents of the information cannot be displayed, Play time is displayed. • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. • File number at Audio file displays the last 3 digits when it exceeds 1000 songs (KDC-W8531/W7531 only). • Album name cannot be displayed in WMA file. (KDCW7031 only) • Song title, Artist name, and Album name cannot be displayed in AAC file. (KDC-W7031 only)...
)
