Votes - 3, Average rating: 3 ( )

Manafacture: Kenwood File size: 822.02 kb File name: Language of manual:

Other manuals for this model:

Car Receivers - KDC-V6090R (425.65 kb)

Car Receivers - KDC-V6090R (1.25 mb)

"CALL" disappears from the display, and the volume of the original source is restored gradually. Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually. — 11 — General features English System Q You can recall the best of the music. Switching the Preset Sound Setting: Each time you press the Q button, switches as follows: Scan of Flat – Easy Easy(Default setting) Jazz Flat Rock User memory* Pops Top 40 *User memory: The unit returns to the state adjusted the last time with the audio control setting feature. As you proceed, each indicator would go on. NOTE The System Q function changes the values of the following sound quality parameters: Bass centre frequency, bass level, bass quality factor, bass extend, middle centre frequency, middle level, middle quality factor, treble centre frequency, treble level non-fading level, high-pass filter frequency for front output, high-pass filter frequency for rear output, and low-pass filter frequency for non-fading output. Their setting values are different depending on the setting of the speaker setting mode. 2 Press the Q button 3 Press either the 4 or . button to select the speaker. The setting switches Off ("SP OFF") / For 6/6x9 For 5/4 in. speaker ("SP 5/4inch") For the OEM speaker ("SP O. 4 Press the Q button to end the speaker NOTE Speaker setting function allows for tuning treble Function of the KDC-6090R Non-Fading Output You can turn the non-fading output on and off whilst the preout is switched to the non-fading preout. Turning non-fading output On/Off : Hold down the NF button for one second or more to set the function ON or OFF. "NF ON" is displayed when the non-fading output is set ON. Speaker Setting This function allows you to adjust the setting that is recalled with the System Q, according to types of speakers. 1 Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected. — 12 — Adjust various parameters of sound quality. Hold down the AUD button for one second or more to enter the control mode. Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. Source tone memory Each source (CD, FM, AM, and disc changer) has its own memory in which to store the bass, middle, treble and N-F level settings. (N-F level : KDC-6090R only) The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). Adjust each mode Press the 4/.button. Look at the table to adjust the mode being displayed. Press the AUD button to end the control mode. Determining the parameters in the audio control setting will clear all the adjustments made in the System Q and they are replaced with the values made in the audio control setting. NOTE 4 3 NOTE 2 1 Audio Control Setting Audio control features — 13 — FM AM 4 . AUD KDC-6090R/KDC-5090R KDC-V6090R Selecting mode Setting value Selecting mode Setting value Audio control features English Bass Level Function of the KDC-6090R Adjust the bass level. Adjust the Non-fading Non-Fading Level Display and setting: "Bass" : - 8 – + 8 Display and setting: "NF Level" : - 15 – + 15 NOTE Middle Level Adjust the middle level. Display and setting: "Middle"/"MID" : - 8 – + 8 Treble Level Adjust the treble level. Display and setting: "Treble"/"TRE" : - 8 – + 8 Balance Level Adjust the balance level. Display and setting: "Balance" : Left 15 – Right 15 Fader Level Adjust the fader level. Display and setting: "Fader" : Rear 15 – Front 15 This mode is available only when the set to on. Function of the KDC-6090R High-pass Filter Frequency for Front Output Adjust the frequency of the High-pass filter for front Display and setting: "HPF F" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz NOTE You can separately set the high-pass filter for front and rear output, including preouts. The high-pass filter works except during non-fading preout when switched to non-fading. Function of the KDC-6090R High-pass Filter Frequency for Rear Output Adjust the frequency of the High-pass filter for rear output. Display and setting: "HPF R" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz NOTE You can separately set the high-pass filter for front and rear output, including preouts. The high-pass filter works except during non-fading preout when switched to non-fading. — 14 — Tuner features Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Display and setting: "V Offset"/"VOL Offset" : - 8 – ± 0 Volume Offset Function of the KDC-6090R Adjust the phase for Non-Fading output. Display and setting:...

Download now

Please, enter two numbers from picture: