TEL Mute When the faceplate is kept remove open, according to the (page 33) setting, the faceplate is hidden and The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Set the left side of the faceplate in the faceplate bracket. The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. 2 Press the right side of the faceplate until it locks. — 16 — Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [4] or [.] button. During reception of stereo stations the "ST" indicator is ON. Tuning Tuner features — 17 — ST indicator Preset station number Frequency display Band display IN P/S ATT ST LOUD RDS TI 4 . AM FM SRC #4/8 MENU #3/7 P.M #1/5 #2/6 KDC-PSW9521 KDC-M907/ KDC-M9021/ KDC-8021 ST indicator Band display Preset station number Frequency display T uner features Tuner features Direct Access (Function Entering the frequency 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote. Example: Desired frequency Press button 92.1 MHz (FM) [#0], [#9], [#2], [#1] 810 kHz (AM) [#0], [#8], [#1], [#0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Enter Memory mode Press the [P.M] button for at least 1 second. "Preset Memory" is displayed. 3 Select the frequency to put in the memory Press the [ 4] or [ . ] button. 4 Select the preset Press the [FM] or 5 Put the frequency in Press the [P.M] button for at least 2 The preset number display 6 Repeating steps 3 to 5 and putting station in the memory. On each band, 1 station can be put in — [#8]. 7 Exit Memory mode Press the [P.M] button. Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "Auto Memory"/"A-Memory" display. 4 Open Auto Memory Entry Press the [ 4] or [ . ] button for at least 2 seconds. When 8 stations that can be received are put in the memory Auto Memory Entry closes. — 18 — When the put in the memory. • When Auto Memory Entry SNPP (Station (Function of Remote) stations preset in the FM1 Likewise, when it is done with in FM1 or FM2 aren't put in the 8 stations can be put in the memory Displaying the program 1 Enter SNPP mode Press the [DNPP] button on When "SNPP" is displayed, the program the FM1, FM2, FM3 and AM band in For stations without a program service name displayed instead. Preset Tuning Changing the display order Press the [ 4] or [ . ] button. Calling up the stations in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the [#1/5] — [#4/8] button. The stations are called up as shown below. Press button Call up number Changing the displayed band Press the [FM] or [AM] button. 2 If the station you want is displayed Press the [OK] button on the remote. The station for the program service name being displayed is received. Canceling the SNPP mode [#1/5] No.1 [#2/6] No.2 [#3/7] No.3 [#4/8] No.4 jjjj No.5 Press the [DNPP] button on the remote. No.6 No.7 No.8 Each time the button is pressed, the called up station switches cyclically. — 19 — RDS features RDS features English AM FM . 4 #4/8 TI#3/7#1/5 #2/6 /PTY /P.M /SCRL KDC-PSW9521 Program Service name Radio text TI indicator KDC-M907/ KDC-M9021/ 8021 Program Service name IN P/S ATT ST LOUD RDS TI TI indicator Radio text Switching to traffic bulletin starts even when Press the [TI] button. Each time the button is pressed Information function turns ON or OFF. When it's ON, "TI" indicator is ON. When a traffic information station isn't indicator blinks. When a traffic bulletin starts, "Traffic Info" is displayed it and it switches to traffic information. • During reception of a AM station when the Traffic Information function is turned ON, it switches to a FM station. • During reception of traff...
