User manual Kenwood, model KDC-MP6029
Manafacture: KenwoodFile size: 1.09 mbFile name:
Language of manual:
Free link for this manual available at the bottom of the page
manual abstract
Each time the button is pressed, the sound setting switches. Sound setting Display Natural "NATURAL" User memory* "USER" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP40" Jazz "JAZZ" • *User memory: The values set on the (page 8). KDC-MP5029 doesn't have the User memory function so the values of Bass, Middle, and Treble set in audio control are replaced to the System Q values and "USER" is not be displayed when the System Q setting is changed. • Each setting value is changed with the (page 9). First, select the speaker type with the Speaker setting. Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Audio item Turn the [VOL] knob. Adjustment Item Display Range Subwoofer level *1*2 "SW L" –15 — +15 Bass level "BAS L" –8 — +8 Middle level "MID L" –8 — +8 Treble level "TRE L" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 • *1 You can control this item when (page 9) is set to "SW ON". • *2 Function of the KDC-MP6029 5 Exit Audio Control mode Press any button. Press the button which is not [VOL] knob and [ATT] button. Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Setup the Audio item Turn the [VOL] knob. English | 9 Adjustment Item Display Range Front High Pass Filter *2 "HPF" Through/80/100/120/150 /180 Hz Rear High Pass Filter *2 "HPR" Through/80/100/120/150 /180 Hz Low Pass Filter*1*2 "LPF" 60/80/120/Through Hz Subwoofer Phase*1*2 "PHAS" Reverse (180°) / Normal (0°) Volume offset "V-OFF" –8 — ±0 Loudness "LOUD" ON/OFF • Volume offset: Each source’s volume can be set as a difference from the basic volume. • Loudness: Compensating for low and high tones during low volume. • *1 You can control this item when (page 9) is set to "SW ON". • *2 Function of the KDC-MP6029 5 Exit Audio Setup mode Press [VOL] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time the knob is turned, the setting switches as shown below. Speaker type Display OFF "SP OFF" For 5 & 4 in. speaker "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6" For the OEM speaker "SP OEM" 4 Exit Speaker Setting mode Press the [VOL] knob. Function of the KDC-MP6029 Subwoofer Output Turning the Subwoofer output ON or OFF. Hold down on [AM] of the Control knob for at least 1 second. Each time the button is pressed, Subwoofer output switches ON and OFF. When it’s ON, "SW ON" is displayed. 10 | English General features Switching Display Switching the information displayed. 1 Enter Switching Display mode Press the Control knob for at least 1 second. "DISP SEL" is displayed. 2 Select the Display item Push the Control knob to [4] or [.]. In Tuner source Information Display Frequency "FREQ" Clock "CLOCK" In CD & External disc source Information Display Disc title* "D-TITLE" Track title* "T-TITLE" Track number & Play time "P-TIME" Clock "CLOCK" In Audio file source Information Display Song title & Artist name* "TITLE" Album name & Artist name* "ALBUM" Folder name "FOLDER" File name "FILE" Track number & Play time "P-TIME" Clock "CLOCK" In Auxiliary input source Information Display Auxiliary input name "SRC NAME" Clock "CLOCK" 3 Exit Switching Display mode Press the Control knob. • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed.(KDC-MP6029 only) • * If the contents of the information cannot be displayed, Playtime is displayed. • When the clock display is selected, the display setting of each source will be switched to the clock display. (KDC-MP5029 only) • Album name cannot be displayed in WMA file. • Song title, Artist name, and Album name cannot be displayed in AAC file. Function of the KDC-MP5029 Dimmer Control You can change the unit's display to dimmer. Press the [DIM] button for at least 1 second. Each time the button is pressed for 1 second, the Dimmer contol turns ON and OFF. When it’s ON, "DIM ON" is displayed. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to the front and remove it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that re...
Other models in this manual:
Car Receivers - KDC-MP5029 (1.09 mb)
)
