|
manual abstract
. FM/ AMATT/ u d SRC/ PWR OFF LOUD LOUD indicator ATT indicator SYSTEM Q indicator Turning on the power: Press the SRC button. NOTE Turn the power on before carrying Turning off the power: Hold down the PWR OFF button for Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or turning it all the way down deactivates the attenuator function. — 7— General features English Switching Modes Switching Modes: Each time you press the follows: t Tuner mode t CD mode t External disc control mode 1(KDC-4590R/ t External disc control mode 2 / AUX mode (KDC-4590R/4590RV/4090R only) t Standby mode Selecting the standby mode: Press the SRC button repeatedly to select to "ALL OFF" . When "ALL OFF" is displayed, the standby mode is turned on. The standby mode turns all functions off although leaving the unit’s power on. Use this mode when you want to have the display illuminated but do not want to listen to anything. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected. • To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCAS210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDCCX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only). During the AUX mode, "AUX" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode. • If you have selected Standby mode, the timer function that turns the power off automatically will be activated. To find out how to set the time on the timer, and how to cancel the timer function, function under Menu Loudness This function amplifies low and turned down. The LOUD indicator lights up, when on. Turning Loudness On/Off: Hold down the LOUD button for one second the loudness on and off. System Q You can recall the best audio setting preset for different of the music. Switching the Preset Sound Setting: Each time you press the Q button, the preset sound setting switches as follows: Scan of Flat – Easy (Default setting) Easy Flat Jazz Rock Pops Top 40 As you proceed, each indicator would go on. NOTE The System Q function changes the values of the following sound quality parameters: Bass centre frequency, bass level, bass quality factor, bass extend, middle centre frequency, middle level, middle quality — 8— factor, treble centre Note that some of audio control setting Their setting values are mobile preset plan mode. Function of the KDC-4590R/KDC-4590RV Mobile Preset This function allows you to adjust the with the System Q, according to types of 1 Press the SRC button repeatedly to select the standby "ALL OFF" is displayed when the standby mode is 2 Press the Q button to enter the mobile preset plan mode. 3 Press either the 4 or . button to select the type of speaker. The setting switches as follows. Off ("SP OFF") / For the OEM speaker ("SP OEM") / For 6/6x9 in. speaker ("SP 6/6x9") / For 5/4 in. speaker ("SP 5/4") 4 Press the Q button to end the mobile preset plan mode. NOTE When you change the type of speaker setting, the bass, middle and treble tone settings are returned to original levels. TEL Mute Shut down the audio system temporarily whenever an incoming call is received. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from original source is restored Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e., the one returned to automatically, and the NOTE The function will not work if a cable is not connected to the car phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. — 9— English General features Audio Control Adjust various parameters 1 Hold down the AUD button the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the change as follows: Pressing the FM button advances the display, AM button reverses it. Bass Fader Middle Balance Treble NOTE Source tone memory Each source (CD, MD, FM, AM and disc changer) has its own memory in which to store the bass, middle and treble tone settings. The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.). 3 Adjust each mode Press the 4/ . button. Look at the table to adjust the mode...
Other models in this manual:Car Receivers - KDC-305RA (588.59 kb)
Car Receivers - KDC-305RG (588.59 kb)
Car Receivers - KDC-3090RA (588.59 kb)
Car Receivers - KDC-3090RG (588.59 kb)