|
manual abstract
The number of the recalled station is displayed. The 4 button moves . button to the right. 6 Press the FM or AM Characters that can be Alphabet : A ~ Z Numerals and symbols : 0~‘ ` % & * + - = , . / \ < > [ ] 7 Continue steps 5 and 6 until all the name. NOTE You can enter up to eight characters for 8 Assigning Names Press the MENU button. The name of the station is stored in memory, and Name Preset mode ends. Also, if you make no input for 10 seconds, the name stored up to the point that you have entered, and the mode ends. NOTE Function of the KDC-416S Station Name Preset (SNPS) You can assign names to radio stations with the Station Preset Memory. Up to 18 FM stations and 16 AM stations can be assigned names. 1 Adjust the frequency to the station whose name you want to enter. 2 Enter the menu mode Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered. 3 Press the FM or AM button to select the display "NAME SET" . 4 Press either the 4 or . button for at least two seconds to enter the station name preset mode. The cursor will blink in the position where letters are entered. 5 Press either the 4 or . button to move the cursor to the desired position. • You can assign names to up to 18 FM stations and 16 AM stations. • All the station names will be erased if you press the Reset button. • If you want to change the name of a station, first display the name of the station (following steps 1 to 4 above), then change the letter(s) that you want by following steps 5 and 6. Function of the KDC-416S Switching Display for Tuner You can change the display used when listening to the radio. Changing the Display: Each time you press the CLK button, the display changes as follows: — 14 — CD/External 04/ . Station frequency SNPS name (only when Clock Operation of the KDC-316S/KDC-37MR/KDC-316V/ KDC-416S SRC CLK/ MENU M.RDM REP RDM SCAN SCRL FM/ AM Clean Reception System Circuit (CRSC) Track number Temporarily have reception switched from stereo to reduce multi-path noise when listening to the FM station. The factory default for this function is ON. Turning CRSC On/Off: Press the CRSC button for at least one second to turn the function on/off. The CRSC indicator lights up when CRSC is on. Disc number Track time IN indicator RDM indicator SCN indicator Track timeIN indicator REP indicator Track number RDM indicatorIN indicator SCN indicator REP indicator Track number Disc number Track time KDC-316S/37MR/316V/216S KDC-116S NOTE • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned on. In such a situation, turn it off. • The KDC-416S has the equivalent function. For details, refer to the Clean Reception System Circuit page for the menu settings. (page 20) — 15 — English CD/External Playing CDs NOTE Playing CDs: If no CDs are inserted, facing up. If a CD is already inserted, select the CD mode. "CD" is displayed when the CD mode The CD will start playing. The IN indicator lights up when a CD Stopping and Ejecting CDs: Press the 0 button. The CD stops playing and ejects from the slot. 2CAUTION • Do not attempt to insert a CD into the slot if another already there. • The unit can only play 5 in. CDs. If you insert a 3 in. CD, get stuck inside and can cause the unit to malfunction. NOTE When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it. Function of the KDC-416S/KDC-316S/KDC-37MR/KDC-316V Playing Other Disc mode This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current unit). Playing Discs: Press the SRC button repeatedly to select the external disc control mode. The disc will start playing. The external disc control that is connected. Mode Display Examples • "CD2" ...when a CD player • "DISC" ...when a disc changer • "DISC-1/CH-1" , "DISC-2/CH-2" connected NOTE • When one disc has finished playing its in the changer will start playing. When the changer has finished, the player will return to start playing it. • Disc #10 is displayed as "0". Function of the KDC-416S Switching Display for Discs Switch the display that appears while discs are playing. Switching Display for Discs: Each time you press the CLK button, the display during disc play switches as follows: Track time Disc name (DNPS) (only when being preset) (Function of disc changers) Disc title (Units featuring CD text/MD only) (Function of disc changers) Track title (Units featuring CD text/MD only) (Function of disc changers) Clock — 16 — NOTE • You can give names function (page 19). Note that depending on • If you try to display the name "NO NAME" is displayed instead. • When there is an attempt to display the disc title/track title has not been displayed for CD and "NO TITLE/NO MD. • Depending on the type of characters of characters may not be displayed. Fast Forwarding and Reversing Disc Play Fas...
Other models in this manual:Car Receivers - KDC-116S (494.59 kb)
Car Receivers - KDC-216S (494.59 kb)
Car Receivers - KDC-316S (494.59 kb)
Car Receivers - KDC-316V (494.59 kb)