Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
• Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. Projections Grooves 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. English | 11 Tuner features Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob to [4] or [.]. • During reception of stereo stations the "ST" indicator is ON. Function of the KDC-W431G Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed, the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control. OFF SCAN RDM REP VOL Q AUD SET UP MENU PTY DISP ATT DIM AUTO AME SCRL + - SRC 1 - 6 AUTO/ AME Band display Frequency display Preset station number ST indicator Control knob 12 | English Tuner features Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [4] or [.]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob to [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. • When the
Car Receivers - KDC-3031A (604.56 kb)
Car Receivers - KDC-3031G (604.56 kb)
Car Receivers - KDC-309G (604.56 kb)
Car Receivers - KDC-W4031 (604.56 kb)