Login:
Votes - 1, Average rating: 5 ( )

User manual Kenwood, model KDC-217

Manafacture: Kenwood
File size: 443.79 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


1 Select the source for Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items switch as shown below. 4 Adjust the Audio item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass level "BAS" –8 — +8 Middle level "MID" –8 — +8 Treble level "TRE" –8 — +8 Balance "BL" Left 15 — Right 15 Fader "FD" Rear 15 — Front 15 5 Exit Audio Control mode Press the [AUD] button. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. — 8— 3 Select the Speaker 3 Select the Speaker Each time the button below. Speaker type Display OFF "SP-F" For the OEM speaker "SP-O" For 6 & 6x9 in. speaker "SP-6" For 5 & 4 in. speaker "SP-5" 4 Exit Speaker Setting mode Press the [Q] button. Clock Display Press the [CLK] button. Each time the button is pressed the clock display turns ON or OFF. When it’s ON, the clock indicator is ON. Adjusting Clock 1 Select the clock display Press the [CLK] button. 2 Enter clock adjustment mode Press the [CLK] button for at least 2 seconds. The clock display blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [ 4] or [ . ] button. 4 Exit clock adjustment Press the [CLK] button. Function of the KDC-219/KDC- DSI (Disabled System Indicator) A red indicator will blink on the removed, warning potential thieves. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Set the DSI While pressing the [#1] and [#3] button, press the button. Each time the step 1 and 2 operation is done the DSI turns OFF. — 9— English EnglishTuner features Function of the AM CRSC FM/ Theft Deterrent The faceplate of the helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing • The faceplate is a precision piece of equipment damaged by shocks or jolts. For that reason, keep its special storage case while detached. • Do not expose the faceplate or its storage case to direct or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. . 4 SRC #1 - 6 AUTO/ AME KDC-219/KDC-2019V/KDC-2019/KDC-29MR/KDC-217/KDC- ST indicator Preset station number CRSC indicator KDC-119/KDC-119S Band display Frequency display AUTO indicator ST indicator Band display Preset station number Frequency display AUTO indicator CRSC indicator — 10 — Tuning Mode Tuning Mode Each time the button is pressed mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2" Search in order of the stations seek indicator in the Preset memory. Manual — Normal manual tuning control. 1 Select the band Press the [FM] or 2 Select the frequency Press the [ 4] or [ . ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for The preset number display blinks On each band, 1 station can be put in — [#6] button. Auto Memory Entry Putting stations with good reception in the memory Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUnE" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [ 4] or [ . ] button. During reception of stereo stations the "ST" indicator is ON. Station Preset Memory Putting the station in the memory. automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning...

Other models in this manual:
Car Receivers - KDC-119 (443.79 kb)
Car Receivers - KDC-119S (443.79 kb)
Car Receivers - KDC-2019 (443.79 kb)
Car Receivers - KDC-2019V (443.79 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category