Votes - 1, Average rating: 4
(
)
)
|
manual abstract
"BAS": Adjust the bass level. Setting values: - 8 - 8 "TRE": Adjust the treble level. Setting values: - 8 - 8 Audio Control "BL": Adjust the Setting values: Adjust various — 5— General features General features Adjusting Time Adjust the time. Setting values: Rear 15 - Front 15 English dB (Sound Coordinate) You can recall the best audio setting preset for different types of the music. 1 Press the AUD button to enter the Sound Coordinate mode. 2 Press a preset button (#1-5). The preset settings of the bass and treble tones are recalled. #1: Flat (dB-1) #2: Rock (dB-2) #3: Pops/Top 40 (dB-3) #4: Jazz (dB-4) #5: Easy (dB-5) 3 Press the AUD button to end the sound coordinate mode. 1 When the time is not displayed, first press the CLK button to display the time. 2 Press the CLK button for at least two seconds to enter the clock adjustment mode. The time display will blink. 3 • Adjusting the hours Press the BAND button to advance the hours. • Adjusting the minutes Press the . button to advance the minutes, or press the 4 button to make the minutes go back. 4 Press the CLK button to end the clock adjustment mode. NOTE You can call the following settings with this function; frequency, bass level, bass quality factor, bass extension, center frequency, and treble level setting. Clock display Turning clock display On/Off: Each time you press the CLK button, between the clock and each — 6— Tuner features Tuner features KRC-165 You can choose between auto seek tuning of receivable frequencies and manual tuning. 1 Press the SRC (source) button repeatedly to select the tuner mode."TUnE" is displayed when the tuner mode has been selected. 2 Press the BAND button to select the band. Each time you press the BAND button, the band switches between FM1, FM2, FM3, and AM. 3 Press the AUTO button to switch between auto seek tuning and manual tuning. The AUTO indicator lights up only when auto seek tuning is selected. 4 • Auto Seek Tuning Press the . button to seek higher frequencies. Press the 4 button to seek lower frequencies. • Manual Tuning Press the . button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step. NOTE AUTO indicator Frequency STEREO indicator Preset station number indicator The STEREO indicator lights up when stereo broadcasts Band display received. — 7— English English Station Preset Memory Frequency Step Setting Store the frequency of a station. You can then recall that station with a single touch of a button. 1 Select the band/ station that you want to have stored. 2 Press the button (#1-6) that you want to use for the station, for at least two seconds. The button number blinks once in the display to indicate that the data has been stored. Recalling a Preset Station: Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. NOTE You can store six stations in each of the FM1, FM2, FM3, and AM bands. Auto Memory Entry You can automatically store all the receivable frequencies the band currently being listened to, and then recall the touch of a button later. This function is especially when you are travelling and do not know what available. Up to six frequencies can be stored 1 Select the band for auto memory entry. 2 Press the AME button for at least two memory entry. The numbers of the preset station When all the stations in a certain memory, the auto memory entry the last station received. Recalling a Preset Station: Press the preset station The number of the Switch the frequency step used in seeks. The factory defaults are 50 kHz for FM and 9 kHz for AM. 1 Turn the power off. 2 Hold down buttons #1 and #5, then turn the power back on. The frequency step settings will be changed to 200 kHz for FM and 10 kHz for AM. NOTE When you change the frequency step settings, all memory contents will be erased. Returning Frequency Step Settings to Original Values: Repeat steps 1 and 2 above. Clean (CRSC Reception System Circuit) Temporarily have reception switched from stereo to mono reduce multi-path noise when listening to the FM station. The factory default for this function is ON. Turning CRSC On/Off: Press the CRSC button for at least one second to function on/off. indicator lights up when CRSC is on. NOTE Strong electrical fields (such as from power unstable sound quality when CRSC situation, turn it off. — 8— Cassette player features Cassette player features KRC-165 Loading and Playing Cassettes: Load a cassette with the tape exposed on the right. The tape starts playing automatically. With side A facing up, the 3indicator lights up when side A is playing, and 2when side B is playing. The 23indicator lights up while play is paused. Playing Cassettes Already Loaded: Press the SRC (source) button repeatedly to select the tape mode. "TAPE" is displayed when the tape mode has been selected. Listening to the other side: Press the FF button and REW button at the same time. Tape play switches to the other side. Stopping and...