Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
There is no danger of hazardous radiation outside the unit. Setting of the O-N switch will be required depending on the centre unit that is to be connected. The operations you perform and the resultant operation of the unit will differ depending on the setting of the O-N switch. Please see the appropriate description of operations for the "O" or "N" switch setting. 1 2 3 ON O N Cleaning the Unit If the front panel gets power and wipe the cloth or soft cloth. 2 CAUTION Do not wipe the panel with a hard cloth dampened by volatile solvents paint thinner and alcohol. They can scratch the surface of the panel and/or cause the indicator letters to peel off. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the MD player of the unit. Called lens fogging, MDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. — 3— Safety precautions English IMPORTANT INFORMATION This unit is NOT designed directly to control units and sold before 1994. If units, an optional CA-SD200 must be used. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN DAMAGE TO THIS UNIT AND CONTROL UNIT. Handling Mini discs • The MD shutter is designed so that it cannot be opened. If forced open, the cartridge will be damaged and use of the MD will no longer be possible. If the shutter has been opened due to some cause, be careful not to touch the recording portion with a finger. Doing so will cause the sound to skip. • Do not use an MD that has a peeling label. Use of an MD that has a loose or peeling label may cause problems, such as the label coming off inside the player and the resultant inability to eject the MD. • Wipe away dirt or dust from the cartridge surface with a dry cloth before use. Using an oil-soiled cartridge in particular may result in the disc not loading or being unable to eject it. (At time of cleaning, be careful not to open the shutter.) • Do not leave the prolonged period. placed in an MD case • Do not leave the MD in direct sunlight (such as on panel) or in other places that temperatures. The MD cartridge misshapen and will no longer be • MDs designed for use with data cannot used. Please use MDs designed for music. • Do not use lens cleaners. Doing so will lead to breakdown. — 4— — 5 — DIGITAL AUDIO MINI DISC 24BIT RESOLUTION D/A CONVERTER KMD-D400 DASC 3 MD CHANGER + 1 PLAYER 11BAND 60 120 250 380 500 750 1k 2k 4k 8k 16k SPECTRUM ANALYZER DISP MENU Buttons and Display Release button DISP button Operations 1 2 3 01 02 03 MD Slot MENU indicator DISC indicator Disc No. indicator Spectrum analyzer display Title display Opration indicator DEMO indicator Oper ations English MD Changer To set MDs in the main unit: 1 Insert the first MD in the The first MD is set in the 2 Insert the second MD in the The second MD is held in the disc 3 Insert the third MD in the MD slot. The third MD is held in the disc No.3 NOTE • The 0 buttons change colour according to the operation state, as follows. If a disc is present in the stack position: The 0 button corresponding to the disc number glows red. If no disc is present in the stack position: The 0 button corresponding to the disc number glows green. • An MD cannot be inserted while the operation indicator is red. Wait until it changes to green, then insert the MD. • When an MD is inserted, it will be stored as the smallest available disc number. For example, if disc No.1 and disc No.2 are both empty, the inserted disc will be denoted as disc No.1. To play an MD: Select the disc changer mode on the centre unit. NOTE • If your system is connected to a centre unit brought on to the market in 1999 or later (excluding certain models), it will automatically switch to MD play mode when the first MD is inserted, even if there are other sources. • The 0 button with the disc number corresponding to the MD currently playing will blink red. To switch the MD: Select the disc number using the DISC+ or DISC- button on the centre unit. Disc No.1 being played: the indicator blinks Disc No.2 being played: the indicator blinks Disc No.3 being the indicator blinks To store an MD: Press one of the 01 - 03 buttons for at least one The MD currently set in stacker position. NOTE When an MD has been stored in one of the states listed below, depending unit connected. Centre units brought on to the market in The system will remain in the disc play STOP Centre units brought on sale in 1999 or later excluded) : The system will switch to the tuner mode. To eject an MD: Press one of the 01 - 03 buttons depending on the disc you want to remove. NOTE The 0 button with the disc number corresponding to the MD currently being ejected will blink green. NOTE When the O-N switch is set to "O", the phrase "NO NAM...