Votes - 1, Average rating: 3 ( )

Manafacture: Kenwood File size: 829.02 kb File name: Language of manual:

The cursor blinks in the position where character input made. 3 Press either the 4 or . button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the . button to the right. 4 Each press of the 38 button results in the type of characters that are to be entered changing between alphabet and numerals/symbols. Press the DISC+ or DISC– button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z Numerals and symbols: 0~9 @ ” ‘ || % & * + - = , . / \ < > [ ] Special characters: aaeeiioouuNC®.‹ fl aaeeiioouunc©.› fi 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to 12 characters for each name. 6 Press the NAME.S button. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE • You cannot store the names of the discs in the • The number of discs whose names can be stored depending on the disc changer that is connected. your disc changer manual for details. • Discs are identified by their total length and number another disc happens to have the same specifications as that you have already stored a name for, the name will be displayed for it, too. • If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. • Pressing the reset button erases the disc names stored in this unit, but does not erase the names stored in a disc changer. — 51 — English English — 53 — Menu settings XOVER AUD DISP NAME.S .. MENU NF 3-D DAB PWR OFF DSP . DISP SRC FM .. #1-6 MEN..U 4 AM Menu display NEWS indicator RDS indicator LOUD indicator You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. Enter the menu mode Hold down the MENU button for one second or more. "MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the current settings displayed. Selecting function to set Press the FM button to search through the functions until you see the one you want to adjust in the display. Press the AM button to search through the functions backward. Function items change in the order of features that follow in the menu system. Example: If you want to switch the setting of the touch sensor tone function from on to off, first search through the functions until you see "Beep ON" in the display. Changing setting for currently displayed function Press either the 4or .button. The setting will change for each function. Example: The setting of the touch sensor tone will switch from on to off, and "Beep OFF" is displayed. Ending the menu mode Press the MENU button. Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function. NOTE 4 3 2 1 Menu System English English Code Security Function After a security code has been registered, restored if the battery is disconnected from code is first input. NOTE All the steps in this procedure (1 through 7) must be completed before the code security function can be turned on. However, once the procedure is finished, it need not be repeated. Once the code security function has been activated, "Security" disappears from the MENU system. Note that it will no longer be possible to cancel this function afterwards. 1 Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected. 2 Hold down the MENU button for one second or more. "MENU" is displayed first and then "Security" is displayed. 3 Hold down either the 4 or . button for one second or more. "ENTER" will appear in the display for one second, indicating the code setting mode has been entered. When "CODE" appears in the display, you can start inputting the code. 4 Press the preset button and enter your security code. Use the security code shown on your Car Audio Passport. Example: Enter "3510" as your code, pressing the buttons as follows: Step Button to press # Times pressed Display 1 #1 4 “ 3” 2 #2 6 “ 5” 3 #3 2 “ 1” 4 #4 1 “ 0” 5 Hold down the DISP button for three seconds or more. The security code will be set. "RE-ENTER" will appear in the display for one second, asking you to enter the code once again for confirmation. When "CODE" appears in the display, you can start inputting the code. 6 Press the Preset button and input the security 7 Hold down the DISP button again for three seconds "APPROVED" will appear in the display, with the code security function turning on. From this point on, if the unit is disconnected from the battery, the security code must be entered the first time that the unit's power is turned o...

Download now

Please, enter two numbers from picture: