Votes - 1, Average rating: 4
(
)
)
|
manual abstract
6 Station Preset Memory Channel Preset Memory Notes on playing MD Group....... 8 Auto Memory Entry Preset Tuning About MDs..................................9 Preset Tuning Function Setting System..........29 General features .......................10 CRSC (Clean Reception System Circuit) Function Setting System Frequency Step Setting Power Touch Sensor Tone Volume CD/MD/MP3/WMA/External disc Switching preout Attenuator control features .....................21 MD Group Setting Selecting the Source Playing CD & MP3/WMA Opening Demonstration Clock Display Playing MD Security Code Adjusting Clock Playing External Disc Built-in Auxiliary input Setting Demonstration Fast Forwarding and Reversing Built-in Amp Setting Display Mode Switching Track/File Search Security Indicator Full Screen Graphic Switching Disc/Group Search Tuning Mode Half Screen Graphic Switching Folder Search Auto Memory Entry Station/Disc Naming (SNPS/DNPS) Direct Track Search Text Scroll Auxiliary Input Name Setting Direct Disc Search Auxiliary Input Volume Adjustment Balance/ Fader Control Track/File/Disc/Folder/Group Repeat Basic Operations of remote......32 X’Over & Amp Control Track Scan Accessories...............................35 X’Over Preset Memory Random Play Installation Procedure ..............35 DSP(Digital Signal Processor) System Group Random Play Sound Field Setting Magazine Random Play Connecting Wires Preset Equalizer Curve Selection Folder Select to Terminals ...........................36 Equalizer Curve Adjustment Group Select Installation ................................37 Equalizer Curve Preset Memory Text/Title Scroll Troubleshooting Guide .............38 Faceplate Angle Adjustment Specifications ...........................44 — 2— Safety precautions Safety precautions G To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply. • Do not open the top or bottom covers of the unit. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. • When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. • To prevent a short circuit when replacing a fuse, first disconnect the wiring harness. • Do not place any object between the faceplate and the unit. • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. • Do not apply excessive force to the moving faceplate. Doing so will cause damage malfunction. • Do not apply excessive force faceplate or place objects on cause damage or breakdown. Do Not Load 3- If you try to load into the unit, the CD and — 3— IMPORTANT INFORMATION About the disc changer to be connected: To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to "N" . Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected. You can damage both your unit and the CD changer if you connect them incorrectly. Precautions when connecting disc changers released in 1997 or earlier. If a model with no "O-N" switch is connected, some unavailable functions and information that cannot be displayed are generated. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser that are of a weaker class. There danger of hazardous radiation unit. Safety precautions Safety precautions NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. If the unit still fails to operate properly after the Reset button has been pressed, contact your local KENWOOD dealer for assistance. • Press the reset button if ...