Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
qSet your car’s ignition switch to the ACC or ON position. The demonstration screen appears. wPress [SRC/PWR] to turn on the power. ePress and hold [VOLUME] (PUSH SEL) for more than 2 seconds to open the menu. rPress [VOLUME] (PUSH SEL) to select the Demonstration setting. (“DEMO” is displayed.) tTurn [VOLUME] counterclockwise. (Press [0] ({) on the remote control unit.) Note: .To return to the regular mode, press [D] (DISP). .Refer to the section on “Function Settings”. (a Page 22) Remote Control Unit Main Unit The 12-hour system is used for the clock. qPress [SRC/PWR] to turn on the power. wPress [D] (DISP/CLOCK). Clock display ePress and hold [D] (DISP/CLOCK) for more than 2 seconds. Hour blinks rAdjust the hour. [[]: put forward hour. []]: put back hour. Hour entered tPress [D] (DISP/CLOCK). Minute blinks yAdjust the minute. [[]: put forward minute. []]: put back minute. Minute entered uPress [D] (DISP/CLOCK). Completed Note: .“ADJUST” is displayed before adjusting the clock. .Press and hold [[] or []] to change numbers rapidly. Cancellation of Demonstration Clock Setting [SRC/PWR] (Power) [D] (DISP/CLOCK) []] [[] (Hour/minute adjustment) Preparation Before Initial Use Pull the insulation film out from the backside of the remote control gently. Battery Replacement q Remove the battery holder with the remote control unit placed on a flat surface. q Stick your thumbnail into the groove and push the holder in the direction of the arrow at the same time. w Pull it out in the direction of the arrow using a tough pointed object. wPut a battery in the case with (+) side facing up. ePut the case back. Tough pointed object Back side [VOLUME] (PUSH SEL: select) 10 9 ENGLISH CQ-C3433U/C3403U/C3333U/C3303U General [D] (DISP: Display) (CLOCK) [MUTE] (Mute/attenuation) [SQ] (Sound Quality) Default: 18 Setting range: 0 to 40 [SRC/PWR] (Source/Power) Power Set your car’s ignition switch to the ACC or ON position. ON: Press [SRC/PWR]. OFF: Press and hold [SRC/PWR] for more than 1 second. Remote control sensor (a Page 8) Radio Mode Display (a Page 12) [VOLUME] Volume Note: .The volume level can be set independently for each source. (For radio, one volume setting for AM, one volume setting for all FMs) Mute/Attenuation ON : Press [MUTE]. OFF : Press [MUTE] again. You can select mute or attenuation. (a Page 22) Clock Display (at Power Off) When the power of the unit is set to OFF, press [D] (DISP/CLOCK). Clock time (Default) (Display off) When the power is set to ON, refer to the description for each source mode. Down Up Level Meter (a Page 22) SQ indicator indicator 11 10 ENGLISH CQ-C3433U/C3403U/C3333U/C3303U SQ (Sound Quality) SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type. Press [SQ] to select the sound type as follows: Press [D] (DISP) to return to the regular mode. Note: . Settings of SQ, bass/treble and volume are influenced one another. If such an influence causes distortion to the audio signal, readjust bass/treble or volume. (a Page 20) (VOCAL) clear sound: emphasizes middle tone and slightly emphasizes treble. (POP) wide-ranged and deep sound: slightly emphasizes bass and treble. (ROCK) speedy and heavy sound: exaggerates bass and treble. (FLAT) flat frequency response: does not emphasize any part. (Default) Source Press [SRC/PWR] to change the source. Radio CD Player MP3/WMA Player AUX1 An optional unit (ex. CD changer) (if you connect it to System-up Connector of this unit directly) Some optional units (if you use the Expansion Module (CY-EM100U)) Note: .For information about connectable devices, refer to the System Upgrade Guidebook or the instruction manual for each device. (Sound source connected to the port 4 of Expansion Module aSystem Upgrade Guidebook) Port 4 (Sound source connected to the port 3 of Expansion Module aSystem Upgrade Guidebook) Port 3 (Sound source connected to the port 2 of Expansion Module aSystem Upgrade Guidebook) Port 2 (Sound source connected to the port 1 of Expansion Module aSystem Upgrade Guidebook) Port 1 (Sound source connecting to the AUX input terminal of Expansion Module a System Upgrade Guidebook) OR (Sound source connected to the System-up Connector of this unit directly aSystem Upgrade Guidebook) (Sound source connecting to the AUX input terminal a Page 22, Installation Instructions) (When an MP3/WMA data disc is in the player aPage 16) OR (a Page 15) (a Page 12) (when connected) (when connected) (when connected) (when connected) 12 11 ENGLISH CQ-C3433U/C3403U/C3333U/C3303U qRadio Mode Press [SRC/PWR] to select the radio mode. wBand Press [BAND]. eTuning [[]: Higher frequency []]: Lower frequency Press and hold [[] or []] for more than 0.5 seconds, then release it. Seeking will start. Display Change Press [D] (DISP) to change the display as follows. Radio [BAND] (APM: Auto Preset Memory) [D] (DISP) (Display) Preset Buttons [1] to [6] (Preset station) []] [[] (TUNE) Band Frequency Preset number Freq...