Votes - 1, Average rating: 5 ( )

Manafacture: ARC Audio File size: 28.92 kb File name: Language of manual:

1 Specifications KAR6022 KAR5022 Diameter 6 .” Diameter 5 .” Max Power 70 watts Max Power 50 watts Nor. Power 35 watts Nor. Power 25 watts Sensitivity 86db Sensitivity 86db Frequency 60hz-Frequency 80hzresponse 20Khz response 20Khz IMP. 4 Ohm IMP. 4 Ohm KAR4022 Diameter 4” Max Power 40 watts Nor. Power 20 watts Sensitivity 86db KAR4622 Diameter 4” X 6” Max Power 50 watts Nor. Power 25 watts Sensitivity 86db Frequency 110hz-Frequency 90hzresponse 20Khz response 20Khz IMP. 4 Ohm IMP. 4 Ohm KAR6932 KAR5722 Diameter 6” X 9” Diameter 5” X 7” Max Power 110watts Max Power 70 watts Nor. Power 55 watts Nor. Power 35 watts Sensitivity 86db Sensitivity 86db Frequency 50hzFrequency 65hzresponse 20Khz response 20Khz IMP. 4 Ohm IMP. 4 Ohm 2 CAUTION: Please check the suitability of the installation location before you begin. Do not cut any of the car’s structure. Pay attention to the mechanism of the window and door. If you do not have experience with automotive electrical and mechanical systems contact a professional installer. Paying a qualified installer is almost always cheaper then paying a dealership to repair your car. THE INSTALL ARC Audio’s KAR Series coaxial speakers are designed to fit most vehicles without modification. Some locations will require cutting to obtain a proper fit. 1. Remove the interior panel to expose the stock speaker. It may take some time to find and remove all the clip and screws to remove this panel. 2. Remove the stock speaker and disconnect it from the wiring. 3. Check the fit with the new speaker. Make sure that all the door and window hardware will clear the larger magnet. 3 4. You may have to trim some material from around or behind to speaker. 5. Connect the stock speaker wires to the new speaker. Tip: Use a 9V battery and quickly touch it to the terminals of the stock speaker. If the cone moves out the + of the battery is on the + of the speaker. If you noted the color of wire connected to this terminal then you now the + speaker wire. 6. Install the speaker in the location. You may have to drill new holes to secure the speaker. 7. Reinstall the panel. Congratulations you finished and ready to enjoy your new system. If you have any Question about this product please call ARC Audio Technical Service: 209-543-8706 4 LIMITED WARRANTY Before shipping this product back for service call for a Return Authorization number. This number must be clearly marked on the outside of the box. Terms & Conditions: ARC Audio warranties the unit to be free of any material defects or defects in workmanship for a period of one year and will repair this unit or any part thereof only if it proves to be defective as a result of normal use. In order to receive warranty service on this product, the owner must promptly register by filling in and mailing the Warranty Registration Card. Our obligation under this warranty is limited to repairing only the defective components of the unit thereof when it is returned, shipping prepaid, to ARC Audio. This w...

Download now

Please, enter two numbers from picture: