Votes - 3, Average rating: 4.3
(
)
)
|
Photos and specs Alpine CDA-7969R |
manual abstract
15-EN RDS Operation INTLZ DN gf UPFF2 F4 F6 TUNE Receiving Traffic Information While Playing CD or Radio 1 Press the F button. The FUNC indicator will illuminator. 2 Press the F2 (T.INF) button repeatedly until the T.INFO indicator appears in the display. 3 Press the DN g and f UP buttons to select a traffic information station if necessary. • When a traffic information broadcast starts, the unit automatically mutes the CD player or the regular FM broadcast. • When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. • When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T.INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternative frequencies to the AF list. The EON indicator appears while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. 4 Press the F2 button to deactivate the Traffic Information mode. The T.INFO indicator disappears. 5 Press the F button to activate the normal mode. The FUNC indicator will turn off. Priority PTY (Programme Type) This function allows presetting of a programme type such as music category, news, etc.You can listen to a programme in the preset programme type as the unit automatically gives priority to the preset programme type when it begins broadcasting, and interrupts the programme you are currently listening. This feature is functional when your unit is set to a mode other than the LW and MW. 1 Press the F button. The FUNC indicator will illuminate. 2 Press the F4 (P.PTY) button to activate the PRIORITY PTY mode. "PRIO-PTY" is displayed for 2 seconds and then the programme type for 3 seconds. The initial setting is "NEWS." NOTE If no button is pressed within 5 seconds after pressing the F4 (P.PTY) button, the PRIORITY PTY mode is automatically cancelled. 3 Press the DN g or f UP button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. Then press F4 button. The PRIORITY PTY function will activate. 16-EN 4 Press the F4 button to activate the PRIORITY PTY mode again. • To change the programme category, perform the step 3. • To disable the PRIORITY PTY function, press the F4 button. NOTE In the PRIORITY PTY function, unlike in the T.INFO function, the volume does not increase during operation. 5 Press the F button to activate the normal mode. The FUNC indicator will turn off. NOTE Operate the unit while the FUNC indicator is illuminated. If no buttons are pressed within 5 seconds, the FUNC indicator will turn off. Turning Emergency Alarm On or Off 1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button repeatedly to select "PTY31" Each press of the f UP button scrolls the modes as shown. > FM-LE > REG > PTY31 > AMBER > DIM > SUB > BEEP D-OUT < CLOSE < DEMO < AUX < SCR < MUTE < NOTE If you press the DN g button the display scrolls in reverse sequence. 3 Press the TUNE button repeatedly to select the PTY31 ON or PTY31 OFF mode. In the PTY31 ON mode, the unit will show "ALARM" in the display when the unit receives the PTY31 (Emergency Broadcast) signal. 4 Press and hold the INTLZ button for at least 2 seconds to activate the selected mode. Displaying Radio Text Text messages from a radio station can be displayed. 1 Tune in a radio station that transmits text messages. 2 Press the F button. The FUNC indicator will illuminate. 3 Press the F6 (R.TXT) button to activate the Radio Text mode. The display shows "WAIT" for a few seconds, then starts scrolling the text message. It continues until other operation is performed. 4 To cancel the Radio Text mode, press the F6 button. 5 Press the F button to return to the normal operation mode. The FUNC indicator disappears from the display. NOTES • If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT" for 2 seconds. • Operate the unit while the FUNC indicator is illuminated. If no buttons are pressed within 5 seconds, the FUNC indicator will turn off. 17-EN CD Player Operation INTLZ TUNE/-/J DN gf UP F3F4F5 c Opening and Closing the Movable display 1 Press the c button. The movable display will open. To close the movable display, press the c button again. The movable display will close. NOTES • Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. • The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time ...