Votes - 2, Average rating: 4.5 ( )

Manafacture: Alpine File size: 437.15 kb File name: Language of manual:

If you must use the postal service, be sure to register and insure the package. a/d/s/ Limited Warranty Analog and Digital System, Inc. (a/d/s/) warrants to the original consumer purchaser of the a/d/s/ Products described in this manual, that the Product will be free from defects in materials and workmanship for a period of one (1) year after the date of purchase, if the Product is installed by an authorized a/d/s/ retail dealer, the warranty is extended to three (3) years. a/d/s/’ sole obligation under the warranty shall be to provide, without charge, parts and labor necessary to remedy the defects, if any, that appear during the warranty period. This warranty is the sole and exclusive express warranty given with respect to the Product. All other express warranties are hereby excluded. Neither a/d/s/ nor the authorized dealer who sells the Product is responsible for indirect, incidental, or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. IMPORTANT – Keep your original sales receipt. Be sure the retail dealer has written on it the date, model number and serial number (if applicable) of the Product. This information is required for warranty service. This warranty is limited to: • Products purchased from authorized a/d/s/ retail dealers in the United States. a/d/s/ will supply a list of authorized dealers on request. In order to obtain warranty service you must: • Return the Product, freight prepaid, to the a/d/s/ dealer from which it was purchased, an authorized a/d/s/ independent service agency, or to a/d/s/. If necessary you may call the a/d/s/ Customer Service Department for the names and addresses of authorized independent service agencies in your area. • Provide proof of purchase in the form of a copy of your original sales receipt. The date, model num ber and serial number (if applicable) of the Product must be written on the sales receipt. This warranty does not cover: • Damage that is the result of misuse, abuse, accident (including but not limited to damage by water), faulty hookup, defective or maladjusted associated equipment, or the use of the Product with equip ment of which it was not intended. • Cosmetic defects that appear more than thirty (30) days after the date of purchase. Cosmetic damage caused by improper handling is also excluded. • Products that are used for commercial purposes. • The cost of removing or reinstalling the Product. • Damage that occurs while the Product is being shipped to whoever will service it. See the information above regarding shipping procedures. This warranty is void if: • The Product identification or serial number is removed or defaced in any way. • The Product is serviced or repaired by anyone other than a/d/s/ or an authorized a/d/s/ dealer or service agency. specifications amplifier section power output 4W(watts)1 50/channel 150/bridged channel pair power output 2W (watts)2 75/channel distortion all channels driven 0.1% 20Hz to 20,000Hz frequency response ±1dB 10Hz to 30,000Hz signal-to-noise ratio full bandwidth @ rated output power >90dB damping factor @ output connector full bandwidth >150 input sensitivity 100mV to 8Vrms for full output input impedance 47 kW recommended fuse type P850 2 X 40 ATC P650 2 X 30 ATC P450 1 X 40 ATC crossover section3 ch 1 & 2 high-pass ch 3 & 4 high-pass & low-pass ch 5 & 6 high-pass & low-pass (P850), low-pass (P650) ch 7 & 8 low-pass dimensions P850 13" X 2" X 16 1/8" (330mm X 50mm X 410mm) P650 13" X 2" X 141/8" (330mm X 50mm X 359mm) P450 13" X 2" X 11 1/8" (330mm X 50mm X 283mm) 1 All channels driven, continuous FTC rated 4W load, 20Hz to 20,000Hz, <0.1% THD, power input voltage at 13.8DVC. 2 All channels driven, continuous FTC rated 2W load, 20Hz to 20,000Hz, <0.1% THD, power input voltage at 13.8DVC. 3 All channels are selectable with infinitely variable adjustments from 45Hz to 5,000Hz with a slope rate of 12dB/octave and a "Q" of .707. about this manual To get the most from your a/d/s/ PowerPlateTM...

Download now

Please, enter two numbers from picture: