• Never use infant seat for a child able to sit up unassisted. • Never attach infant seat to a chair. • Never use as a carrier or lift while child is seated. Infant Seat Base Hint: If you are converting to an infant seat from high chair, toddler seat or swing modes, remove the seat from the toddler seat base or swing seat base. • Fit the seat onto the infant seat base. • Push to “snap” the seat onto the base. Pull up on the seat to be sure it is secure. High Chair Use Seat High Chair Base 6 • Wh

Before you use the booster car seat, please take time to read and understand this manual completely. It includes important step-by-step instructions on how to restrain your child in a vehicle using the booster car seat. DO NOT allow others to use this booster car seat until they understand these instructions for proper use. Your child’s safety depends on you! Vehicle belt systems are designed to restrain adults. The Safe EmbraceTMBooster Car Seat is a belt positioning car seat that allows you to

Make sure the shoulder straps are not twisted. • Make sure the connector bar strap is not twisted. • Close the connector bar cover. Hint: It is easier to close the connector bar cover if you pull the shoulder straps out as far as you can on the front of the car seat. Chest Clip Use IMPORTANT! The chest clip is only recommended for toddler forward facing use. Buckle the chest clip. Chest Clip /w ■r / I Position the chest clip so that it is in line with your child’s armpits. Please ref

Fasten the chest clip. Thread a shoulder strap through one side of the chest clip, as shown. Make sure the shoulder strap is not twisted. Repeat this procedure to thread the other shoulder strap through the other side of the chest clip. Re-insert the shoulder straps into the shoulder strap slots. Shoulder Straps V Connector Bar 'Connector Bar Cover Connector Bar Strap^ • Pull the connector bar up on the back of the car seat. • Re-attach the shoulder straps to the connector bar. Make sur

• Fit one of the base legs into a channel in the base. Hint: The base legs are designed to only fit one way. If the base leg does not seem to fit in a channel in the base, try the other channel. • Voltear la base y colocarla sobre una superficie plana. • Ajustar una de las patas de la base en un canal de la base. Atencion: Las patas de la base estan disenadas para ajustarse de una sola manera. Si la pata de la base no se ajusta en un canal de la base, intentar en el otro canal. • Retourner la ba

• Never use with an active child who may be able to climb out of the product. • Never leave child unattended. • Never use on any elevated surface. • Never use the toy bar as a handle. Pour prevenir les blessures graves ou la mort qui pourraient survenir si l’enfant tombait ou s’etranglait avec le systeme de retenue : • Toujours utiliser le systeme de retenue. • Ne jamais l’utiliser pour un enfant qui pourrait etre capable de sortir seul du siege. • Ne jamais laisser un enfant sans surveillance.

©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Printed in U.S.A. 79711pr-0920 Grow-With-Me™ Car Seat 5-Point Harness Mode (20-40 lbs.) Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Printed in U.S.A. 79711pr-0920 Message to Parents for 5-Point Harness Mode Message to Parents for 5-Point Harness Mode Thank you for choosing the

.....Installation.Using.a.Locking.Clip.......20–21.Lap.Belt.Installation...............................22–23Forward-Facing Installation............................24.LATCH.Installation.and.Removal...........24–25.Locking.Lap-Shoulder.Belt.Installation...........26. .Non-Locking.ELR.Lap-Shoulder.Belt.. .....Installation.Using.a.Locking.Clip.......27–28.Lap.Belt.Installation.....................................29Check Buckle Position.....................................30Installation in Aircraft..

• Insert a #8 x 3/4" (1,9 cm) screw (provided in this kit) through the right bracket and into the seat support. Tighten the screw with a Phillips screwdriver. Do not over-tighten. Bracket installation is now complete. • For your convenience this kit includes extra screws (just in case you misplace the screws removed in step 3). If after assembling the brackets you have extra screws, dispose of them in the garbage. 4 Seat Back Installation Instructions BACK VIEW BACK VIEW Upper Shoulder Belt Slot

DO NOT use this product until you have installed the brackets on the high chair frame. • The seat back can detach from the seat bottom if it is not completely snapped in place. DO NOT use this product until you have properly installed the seat back to the seat bottom and re-installed the restraint system properly on the seat. Kit Parts Tool needed for installation: Phillips Screwdriver (not included). WARNING CAUTION This kit contains small parts in it's unassembled state. Adult assembly is requ