Votes - , Average rating:
(
)
)
Manafacture: Panasonic
File size: 1.16 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
manual abstract
Caution for AC Mains Lead
Safety precautions
(For United Kingdom)
Placement
(“EB” area code model only)
Set the unit up on an even surface away from direct sunlight, high
e
temperatures, high humidity, and excessive vibration. These conditions
For your safety, please read the following text carefully.
can damage the cabinet and other components, thereby shortening the
us This appliance is supplied with a moulded three pin mains plug for
unit’s service life.
re your safety and convenience.
Do not place heavy items on the unit.
f
o A 5-ampere fuse is fitted in this plug.
Be Should the fuse need to be replaced please ensure that the
Voltage
replacement fuse has a rating of 5-ampere and that it is approved
by ASTA or BSI to BS1362.
Do not use high voltage power sources. This can overload the unit and
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
cause a fire.
Do not use a DC power source. Check the source careful y when
If the plug contains a removable fuse cover you must ensure that it
setting the unit up on a ship or other place where DC is used.
is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
AC mains lead protection
replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock. Do not
CAUTION!
pul , bend, or place heavy items on the lead.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
Grasp the plug firmly when unplugging the lead. Pul ing the AC mains
THE SOCKET OUTLET IN YOUR HOME THEN THE
lead can cause electric shock.
FUSE SHOULD BE REMOVED AND THE PLUG CUT
Do not handle the plug with wet hands. This can cause electric shock.
OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
Foreign matter
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
Do not let metal objects fal inside the unit. This can cause electric
ANY 13-AMPERE SOCKET.
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
If a new plug is to be fitted please observe the wiring code as stated
malfunction. If this occurs, immediately disconnect the unit from the power
below.
supply and contact your dealer.
If in any doubt please consult a qualified electrician.
Do not spray insecticides onto or into the unit. They contain flammable
gases which can ignite if sprayed into the unit.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Service
Blue: Neutral, Brown: Live.
Do not attempt to repair this unit by yourself. If sound is interrupted,
As these colours may not correspond with the coloured markings
indicators fail to light, smoke appears, or any other problem that is not
identifying the terminals in your plug, proceed as follows:
covered in these operating instructions occurs, disconnect the AC mains
The wire which is coloured Blue must be connected to the terminal
lead and contact your dealer or an authorized service center. Electric
which is marked with the letter N or coloured Black or Blue.
shock or damage to the unit can occur if the unit is repaired,
The wire which is coloured Brown must be connected to the
disassembled or reconstructed by unqualified persons.
terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
Extend operating life by disconnecting the unit from the power source if
EARTH TERMINAL WHICH IS MARKED WITH THE
it is not to be used for a long time.
LETTER E, BY THE EARTH SYMBOL
OR
COLOURED GREEN OR GREEN/YELLOW.
CAUTION!
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
Do not place anything on top of this unit or block the heat radiation
Before use
vents in any way. In particular, do not place tape decks or CD/DVD
Remove the connector cover.
players on this unit as heat radiated from it can damage your software.
How to replace the fuse
The socket outlet shall be installed near the equipment and
The location of the fuse differ according to the type of AC mains
easily accessible or the mains plug or an appliance coupler
plug (figures A and B). Confirm the AC mains plug fitted and follow
shall remain readily operable.
the instructions below.
Illustrations may differ from actual AC mains plug.
HDMl, the HDMI logo and High-Definition Multimedia
1. Open the fuse cover with a screwdriver.
Interface are trademarks or registered trademarks of HDMI
Figure A
Figure B
Licensing LLC.
Fuse cover
NORSK
Utstyret bør plasseres i nærheten av AC-stikkontakten, og
støpslet må være lett tilgjengelig hvis det skulle oppstå
problemer.
SUOMI
2. Replace the fuse and close or attach the fuse cover.
Laite tulee asettaa lähelle verkkopistorasiaa ja pistokkeen
Figure A
Figure B
täytyy olla sellaisessa asennossa, että si hen on helppo
Fuse
Fuse
tarttua ongelman sattuessa.
(5 ampere)
7525
(5 ampere)
T
Q
R
2
...