Discs operations (continued)
➡ Page 2 for the position of remote control buttons.
Play Mode function
Repeat play
Press [PLAY MODE] to select the desired mode.
You can repeat program play or other selected play mode.
Press [REPEAT] before or during play.
Mode
To play
“REPEAT ON” and “ & ” are displayed.
1-TRACK
one selected track on the disc.
To cancel
1TR
Press the numbered buttons to select the track.
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ & ” is cleared.
1-ALBUM MP3
one selected album on the disc.
1ALBUM
Press [ALBUM or ] to select the album.
Display function
RANDOM
a disc randomly.
This function allows you to display the information of the current track.
RND
Press [DISPLAY] repeatedly during play or pause.
1-ALBUM RANDOM MP3
all tracks in one selected album randomly.
CD
1ALBUM RND
Elapsed play time Remaining play time
Press [ALBUM or ] to select the album.
MP3
Elapsed time Album name Track name
Note
ID3 (Artist) ID3 (Track) ID3 (Album)
• During random play, you cannot skip to previous track.
Note
• Maximum number of displayable characters: approximately 30
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported will not
be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about the track.
Note on CD-R and CD-RW
MP3
This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an audio
The unit can play MP3, a method of compressing audio without overly hurting audio
recording disc for CD-DA and finalize* it when you finish recording.
quality.
The unit may not be able to play some discs due to the condition of the recording.
When creating MP3 files to play on this unit
* A process performed after recording that enables CD-R/CD-RW players to play audio
• Maximum number of tracks and albums: 999 tracks and 256 albums.
CD-R and CD-RW.
• Compatible compression rate: Between 64 kbps and 320 kbps (stereo).




128 kbps (stereo) is recommended.
Caution
• Disc formats: ISO9660 level 1 and level 2 (except for extended formats).
Choose discs with this mark:


• The time for reading TOC depends on the number of the tracks, the folders or folder
Do not:
structures.
• use irregularly shaped CDs.
Limitations on MP3
• attach extra labels and stickers.
• This unit is compatible with multi-session but if there are a lot of sessions it takes
• use CDs with labels and stickers that are coming off or with adhesive exuding from
more time for play to start. Keep the number of sessions to a minimum to avoid this.
under labels and stickers.
• This unit cannot play files recorded using packet write.
• attach scratch-proof covers or any other kind of accessory.
• If the disc includes both MP3 and normal audio data (CD-DA), the unit plays the
• write anything on the CD.
type recorded in the inner part of the disc.
• clean CDs with liquids (Wipe with a soft, dry cloth.).
If the disc includes both MP3 and other types of audio data (e.g. WMA or WAV), the
unit plays only the MP3.
• Depending on how you create MP3 files, they may not play in the order you
numbered them or may not play at all.
Radio operations
Allocation settings
Manual tuning
Each country allocates broadcast bands according to their particular system.
 Press SC-EN35 [FM/AM] / SC-EN33 [TUNER/BAND] to select “FM” or “AM”.
You can change the AM steps. The step is factory-set to 9 kHz, but you can change
 Press [PLAY MODE] to select “MANUAL”.
it to receive broadcasts allocated 10 kHz steps.
 Press [2/u] or [1/i] to select the frequency of the required station.
Any FM/AM frequencies preset in channels will be changed by this procedure.
To tune automatically
Preset them again.
 Press SC-EN35 [FM/AM] / SC-EN33 [TUNER/BAND] to select “FM” or “AM”.
 Select the FM band with SC-EN35 [FM/AM/MUSIC P.] / SC-EN33 [TUNER/
 Press [PLAY MODE] to select “MANUAL”.
BAND] on the unit.
 Press and hold [2/u] or [1/i] until the frequency starts changing rapidly.
 Press and hold SC-EN35 [FM/AM/MUSIC P.] / SC-EN33 [TUNER/BAND] on
the unit.
• Auto tuning stops when it finds a station.
After a few seconds the display changes to show the current minimum frequency.
• To cancel auto tuning, press [2/u] or [1/i] once again.
Continue to hold the button down. The minimum frequency changes and the step
Note
is changed.
• Auto tuning may not function when there is excessive interference.
To return to the original step, repeat the above steps.
Note
Memory preset
The preset memory will be initialized when you change your frequency step.
You can preset up to 20 FM channels and up to 12 AM channels.
Preparation: Press SC-EN35 [FM/AM] / SC-EN33 [TUNER/BAND] to select “FM”
To improve reception
or “AM”.
FM
AM
Automatic presetting
Press and hold [PGM, -AUTO PRESET] to start presetting.
Manual presetting
 Press [PLAY MODE] to select “MANUAL”.
 Press [2/u] or [1/i] to tune to the required station.
 Press [PGM, -AUTO PRESET].
 Press the numbered buttons to select a channel.
Receive the radio stations after
Change the direction and location of the
The station occupying a channel is erased if another station is preset in that
connecting the antenna. Then attach the antenna.
channel.
antenna cord to a wall or pillar where
 Repeat steps 2 to 4 to preset more stations.
there is good reception.
Selecting a preset station
To improve FM sound quality
Press the numbered buttons to select the channel.
Press and hold [PLAY MODE] to display “MONO”.
For channels 10 to 20 press [ ≧10], then the two digits.
To cancel
OR
Press and hold [PLAY MODE] again until “MONO” disappears.
 Press [PLAY MODE] to select “PRESET”.
• MONO is also canceled if the frequency is changed.
 Press [2/u] or [1/i] to select the channel.
4
• Turn off “MONO” for normal listening.
5
SC-EN35 E,GN,GCS PP.indd 4
22/03/2007 17:17:38

---

...

Other models in this manual:
Car Audio - SCEN35 (1.68 mb)