Votes - 2, Average rating: 3.5 ( )

Manafacture: AudioBahn File size: 107.68 kb File name: Language of manual:

Balances the loudness of the Subwoofer relative to the Front speakers and compensates for room effects on the Subwoofer’s output. It should not be necessary to set the level control to maximum volume to achieve a well balanced installation, but you may need to adjust when changing between music CD's and DVDs. Important: Use Option1 or Option 2, but not both. OPTION 1. Connection with speaker wire -Connect speaker wires from the Receiver’s front left and right speaker outputs to the Subwoofer’s Speaker Level-In connections. Connect left channel to left input and right channel to right input. You have the option of connecting your main speakers to the speaker B outputs on your receiver if it is so equipped; otherwise, you have the option of connecting your main speakers using the connections on the Subwoofer. This will send the audio signal to the main speakers while funneling the low bass frequencies to the subwoofer. To take advantage of this option, connect your main speakers to the right and left outputs on the Subwoofer. Be sure you take care to maintain proper signal polarity by connecting the red wire to the red terminal, and black wire to the black terminal. OPTION 2. Connection with audio cable -Connection with audio cable - This connection employs a left/right audio cable. To use this option, your receiver should include a subwoofer Out jack, which is typical of receivers equipped with Dolby Digital and DTS 5.1 decoding. Locate the subwoofer output jack on the back of your receiver.Using a standard audio cable, connect the subwoofer output on the back of your receiver to the line-In on the back of the subwoofer. SUBWOOFER SERIES TROUBLESHOOTING Troubleshooting Distortion/Knocking If you believe you hear obvious distortion or knocking sounds, immediately lower the volume level of your receiver. Those sounds often indicate that either the receiver or the subwoofer is being over driven and damage can result in playing CD's and DVD's at high volumes. You should avoid turning the bass or treble to maximum levels, and refrain from using the Loudness button when the volume level is high. This can lead to costly loudspeaker failure. Distorted or unnatural sound can also indicate poor connections. Check the connections. If the sound remains poor or distorted, the subwoofer may have a problem. Please call Dual service number for assistance. SUBWOOFER SERIES SPECIFICATIONS Specifications L6SW L8SW FEATURES • Gain control for volume adjustment • High level inputs • Low Level Inputs • Sleep mode feature integrated into the power switch for signal sensing Off/Auto/On •Led Indicator SPECIFICATIONS Woofer: 6.5" PVA treated rigid cone with ridge-edge surround for faster driver action Crossover: Internal cross over Amplifier: Class A/B amplifier - 100 Watts Peak Power/ 50 Watts RMS @ 10% Frequency Response: 50 Hz +/-3dB Dimensions H/W/D: 10.5”x 8.65” x 8.65” Weight: 10 lbs. Cabinet Design: Active Vented (2.25” Port) Enclosure of Acoustically Neutral MDF finished in ”Black Pica” Vinyl FEATURES • Gain control for volume adjustment • High level inputs • Low Level Inputs and Outputs • Adjustable low pass 50 Hz to 150...

Download now

Please, enter two numbers from picture: