Votes - 2, Average rating: 4 ( )

Manafacture: ARC Audio File size: 80.06 kb File name: fd_comp.pdf Language of manual:

Reinstall the panel and point the tweeter at a location between the driver and passenger at ear level. Surface Mount Hold the back piece for the mount in place and mark the screw locations. Pre drill the screw holes and the hole for the wire. Screw the mount to the panel tightly. Run the wire through the hole and gently pull it until the tweeter is fully seated in the mount. Install the retainer and point the tweeter. Crossovers Install the Crossover in a dry location firmly. Don’t just drop it in the bottom 4 Wiring When wiring this system it is important to make all connections carefully and securely. Follow the instructions carefully. All audio connections have a + and -. If one is wired backward the system will play but will sound strange. One speaker will play Out of Phase (backwards) from the others. You may notice a loss of bass response and the vocals will not be in the center of the sound field. Connect the Woofer Using the wire provided with the system connect the positive and negative to the woofer. Run these wires to the crossover and connect them to the terminals marked Woofer + and -. Connect the Tweeter Connect the positive and negative to the tweeter. Run these wires to the crossover and connect them to the terminals marked Tweeter + and -. Connect the Amp Connect the positive and negative to the output. Run these wires to the crossover connect them to the terminals marked 5 A Few Do’s and Don’ts • Always use the crossovers. To leave the crossover out will result in almost certain damage to the component speakers. • Care must be taken not to mix the tweeter and woofer connections. The system will not work and may be damaged. • Do not add more speakers to the crossover. The crossover is designed for the speakers provided only. If you have any Question about this product please call ARC Audio Technical Service: 209-543-8706 6 LIMITED WARRANTY Before shipping this product back for service call for a Return Authorization number. This number must be clearly marked on the outside of the box. Terms & Conditions: ARC Audio warranties the unit to be free of any material defects or defects in workmanship for a period of one year and will repair this unit or any part thereof only if it proves to be defective as a result of normal use. In order to receive warranty service on this product, the owner must promptly register by filling in and mailing the Warranty Registration Card. Our obligation under this warranty is limited to repairing only the defective components of the unit thereof when it is returned, shipping prepaid, to ARC Audio. This warranty is to be considered void if the unit has been tampered with, connected contrary to the installation instructions in the owner’s manual, altered, damaged by improper input voltages or polarity, defaced, or treated in a negligent manner. All returns must be sent freight prepaid, along with $10.00 to cover return shipping and handling. Out of warranty service is available after the warranty expires....

Download now

Please, enter two numbers from picture: