Votes - 4, Average rating: 4.5
(
)
)
|
Photos and specs Alpine SWD-1600 |
manual abstract
Moisture or dust that penetrates into this unit may result in product failure. HAVE THE WIRING AND INSTALLATION DONE BY AN EXPERT. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISE WHILE DRIVING. Failure to do so may result in an accident. USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or injury. CAUTION IN USE CAUTION IN USE When installing, always use the brackets that are supplied. This product is supplied with brackets for safe use and installation. When installing, always use these brackets to firmly fix the product into place. For further information, please refer to Caution! the “installation” page. Always use the brackets supplied EN for installation. Using anything else may cause the product to move while driving, creating a safety hazard. Do not place items with magnetic strips, such as credit cards / store cards nearby. This product is fitted with a contains a powerful magnet. Therefore, please don’t place your wallet or bags near by. The data contained on the magnetic strip of credit/store cards may become corrupted or lost. Do not place heavy things on the product. Putting heavy items or placing your feet on top of the product may cause damage or injury. Do not place drinks / water close to the product. Any drink or water spills will cause product damage. Especially during the summer, the temperature within a vehicle can become extremely high. In such circumstances, please wait until the temperature drops to a reasonable level before use. This product is designed to shut down at high temperature to prevent damage. If no sound is heard, please turn off the head unit and then on again once the temperature inside the vehicle has lowered to a reasonable level. (If the head unit does not have a “remote turn on” lead connected to the product, then please turn the ignition off/on.) In such circumstances, carry on using the product as it is not a fault. Always use the extension power lead included (with 12A fuse), and connect directly to the +ve battery terminal. Only use the extension power cable included. Also, please ensure to connect this directly to the +ve battery terminal. Should you feed off power from the standard vehicle loom, the product may not function properly due to insufficient voltage. The high current draw may also overheat the vehicle loom and create a fire hazard. EN It is vital to securely connect the earth lead to a metal part of the vehicle chassis. Please ensure to connect the earth lead to a metal part of the vehicle chassis with a screw. If the grounding of the earth lead is insufficient, the product may malfunction. Any paint or coating on the earth point of the vehicle chassis should be removed with a file to enable agood connection. DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT. If there is distortion or a popping noise from the subwoofer, the input level is too high. Prolonged use in this condition will result in the deterioration of performance and may lead to damage.. DAMGE CAUSED BY EXCESSIVE INPUT LEVEL WILL NOT BE COVERED BY WARRANTY. If reducing the gain to prevent distortion leads to insufficient output, please install the subwoofer closer to the listener. As a general rule, halving the distance will result in 4 times the volume. DO NOT USE A MOBILE PHONE NEAR THIS PRODUCT. Use of a mobile phone may cause interference and noise. SPECIFICATIONS SPECIFICATIONS MAX POWER OUTPUT…………………………………………… 150W CROSSOVER……………………………………………………… 60~160Hz INPUT IMPEDANCE……………………..………………………… 22k . (Line Input) 36k . (Speaker Input) OPERATIONAL VOLTAGE……………………..………………… DC 14.4V (Operational between: 11~16V) EARTH TYPE……………………..………………...……………… Negative Earth DIMENSIONS……...……………………..………………………… 282mm x 195mm x 92mm WEIGHT……...……………………..……………………………… 4.0kg TROUBLESHOOTING If you have a problem with the product then please check the following before taking for repair. EN SYMPTOMS REASON SOLUTION Unit does not operate. (For example if the fuse is blown) The head unit is not powered up. Power up the head unit. Earth lead is not connected properly. Check the earth lead connection The power lead to the battery is not connected properly. Check the battery lead connection There is power but no sound. The fuse is blown. Replace with a fuse of the correct rating. Remote turn on lead is not connected properly. Check the remote turn on lead connection RCA leads are not connected. Connect RCA leads correctly. Speaker level input cables are not connected properly Check the speaker level input cable connections. The gain is not at the correct level for the system. Adjust the gain setting to an appropriate level for the system. PACKING LIST PACKING LIST PRODUCT NAME QTY PRODUCT NAME QTY Connector Power lead extension...