Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
can damage it and cause fire or electric shock. Do 16. Volume Adjustment not touch the power cord with wet hands. Do not If abnormal noise is produced during play at high place the power cord near heating equipment and volume, reduce the volume level. Distorted sound do not use the unit. If the plug fits loosely in an can cause overheating of speakers and amplifier. electric outlet or the plug or cord is hot. If the cord Before switching power supply on, set the is damaged, replace it as continued use may amplifier volume to minimum. Sudden, loud noise result in fire or electric shock. can cause damage to hearing. 11. Unit plug 17. Connecting TV/other audio equipment Insert the plug into an outlet all the way to its When connecting a TV or other audio equipment, base. Incomplete insertion can cause heat always shut off power, read the operating manual production, and dust build-up can cause fire. for each device and follow the instructions for Contact with the prongs of the plug can also connection. Use only designated cables. cause electric shock. Use of non-designated cables or extension cables Do not connect the unit to an outlet where the can cause heat production, burns, and fire. connection is loose even when the plug is inserted 18. Antenna all the way to its base. Do not use the unit if the An outdoor antenna should be located away from plug is hot. Heat production can cause fire. power lines. If dust or metal accumulates on or near the prongs - -- 4 44- -- ENGLISH 19. Maintenance. Before undertaking power supply. Have the approximately once a year Accumulated dust inside and without cleaning can cause fire or Before cleaning this product make sure power is turned off and the power cord is disconnected from the wall outlet. Clean with soft cloth. If the product is particularly dirty, moisten the cloth and wring out before use. Complete by wiping with a soft, dry cloth. Do not use liquid solvents such as alcohol or thinner to clean this product, as such chemicals can damage the cabinets. 20. Servicing The unit should be serviced by qualified personnel when: * The power-supply cord or plug has been damaged, or * Objects or liquid have entered the unit, or * The unit has been exposed to rain; or * The unit is malfunctioning, or * The unit has been dropped or the cabinet has been damaged. 21. Children Use particular care in households where children are present. 22. Temporary Fault If this product receives a strong external shock (such as from an impact, static electricity or a power surge due to lightning), or if this product is used incorrectly, it may stop working properly. In such cases, press the power button to turn the power off and then back on again, and check if this product is working normally. - -- 5 55- -- ENGLISH Notes ¦ Volume Setting Before switching on, minimize the volume. Sudden large sound output may damage the speaker. ¦ Volume Etiquette To avoid disturbance in your neighborhood, enjoy your unit at an appropriate volume. Remember that particularly at night, even low volume carries into surrounding areas. Help to maintain a pleasant living environment. ¦ Speaker Cord Connection Always connect speaker systems with the power disconnected. If a speaker cable is inadvertently shorted, the protection circuit in the amplifier will operate, and audio output will stop temporarily. In this event, disconnect the power cord from the outlet, correct the shorted area and reconnect the power cord to the outlet. - -- 6 66- -- Part Names and Part Names and ENGLISH . . - + erminals ers, insert the les so that they ing terminals. er cable - 7 ENGLISH Maintenance ¦ Maintenance Before maintaining the unit, ensure the power is off and the power cord removed. Remove any dirt from the unit by lightly wiping with a soft cloth. If it is particularly dirty, use a slightly damp cloth to wipe it down, then use a dry cloth. Do not use gasoline or thinners, etc. on this unit as it may damage the cabinet. ThinnerGasoline ¦ Problems during Operation of the Unite During operation, the unit may stop working properly if it suffers from significant external disruption (impact shock, static electricity, voltage fluctuation caused by lightning, etc.) or is operated incorrectly. In this situation, turn the amplifier power to switch to the “Off” position. Turn it back on again and check if normal operation has resumed. (If a problem persists, please contact our Service Centre) ¦ Specifications Specifications and appearance are subject to change without prior notification. Diameter: .12cm Magnet Insulation: EIAJ Grade I Type: Bass ref/box Input Resistance: Rated 30W / Maximum 60W (with box) Impedance: 6 . Dimensions: 286mm(W)x363mm(D)x373mm(H) Weight: Approx. 12kg - 8 Warranty Service ENGLISH ¦ Warranty Certificate (included) After reading the contents of the Warranty Certificate, put it away in a safe place. Warranty period The warranty period is one year from purchase date. Some costs may be incurred even within the warra...
Other models in this manual:Car Audio - Speaker 512 (469.96 kb)