Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Setting the clock
IMPORTANT!
– To set clock in the Eco Power Standby mode, fi rst press and hold 2 for more than 2
seconds to switch to the standby mode.
1
In standby mode, press and hold SET TIME/PRO.
2
When the hour digits fl ash, press VOL +/- to set the hours.
3
Press SET TIME/PRO.
4
When the minute digits fl ash, press VOL +/- to set the minutes.
5Press SET TIME/PRO again to confi rm the time setting.
Program remote control
1
Place the smart remote control (A) within 1mm-10mm distance from the other remote control
(B).
2
Press LEARN for 2 seconds to activate the learning mode.
➜ A blue indicator on the smart remote control (A) lights up.
3
Press the button on the other remote control (B) that is to be stored on the smart remote
Notes:
control (A).
– If there is no operation within
➜ If the code is received successfully, the blue indicator fl ashes.
8 seconds, the systme quits the
4
learning mode automatically
and the indicator turns off.
Press one of the 12 white learning buttons on the smart remote control (A) to store the code
– During the learning process,
of this button.
the normal remote control
➜ If the code is stored successfully, the indicator fl ashes green for 2 seconds, then turns blue
again.
functions are disabled.
– By default, the remote control
5
codes of a Philips TV are stored
Repeat steps 3 and 4 to program more buttons on the smart remote control (A).
in the smart remote control.
The available preset buttons
6
are POWER, AV, 3CH4, 3VOL4,
MUTE and SLEEP.
Press LEARN to exit the learning mode.
HSB3280_QSG_Eng.indd 3
HSB3280_QSG_Eng.indd 3
2008-07-24 9:59:38
2008-07-24 9:59:38
...